Anybody wants a stepper motor analyzer?
-
@fcwilt Once you "make" an e-gift card, you can then email it to yourself. you get something like this:
All you need to do is copy the code after "Claim Code" and IM it to Zapta. It's a single use only code, and is redeemed by him.
-
@zapta Gift card code sent via Chat.
Thanks a million for this.
-
Hi everybody, when you purchase the gift card, please purchase at amazon.com and not at at local amazon sites. I believe that any amazon account should be able to login to http://amazon.com.
-
Got mine today, SUPER excited. Amazing Stuff!
Luke
-
@zapta Beautiful!
-
Mine arrived.
Thanks much.
The color of the case doesn't match my eyes but that's OK.
And I cannot find the manual. It wasn't in the box. You do have one don't you?
Seriously though, where do I go to read about using this little gem?
Thanks again.
Frederick
Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6
-
@fcwilt said in Anybody wants a stepper motor analyzer?:
And I cannot find the manual. It wasn't in the box. You do have one don't you?
@fcwilt, you can find documentation in this page https://github.com/zapta/simple_stepper_motor_analyzer . If anything is not clear, please let me know an I will update.
Basically you go from screen to screen using the right/left arrows. On the home page you will also see an icon that leads to the settings screen.
Some screens have additional features such as run/stop or scale (tap on the chart to toggle, there should be some visual indication such as text change if the tap changed anything). The trash can icon clears the data.
BTW, it got to Twitter
Noticeable current degradation at high speed. https://twitter.com/LukesLaboratory/status/1410670399705202695 -
@fcwilt said in Anybody wants a stepper motor analyzer?:
The color of the case doesn't match my eyes but that's OK.
It's called Greenery, was the color of the year 2017.
https://www.pantone.com/articles/color-of-the-year/color-of-the-year-2017
I got it from Filacube, I like their filaments.
-
@zapta said in Anybody wants a stepper motor analyzer?:
I got it from Filacube, I like their filaments.
Never heard of them but will be checking them out.
Thanks.
Frederick
-
Code is in our existing chat
Duet controlled Lathe, micro mill, 3d printer and 1992 Haas VF2 VMC
-
Hi everybody, the first batch of 11 seems to go smooth so far and we established the shipping rates to the US ($9) and to Europe ($16), which mean that total cost is $39 for the US and $46 to Europe. For other places it will be $30 + US post office shipping rate.
The next batch is almost ready and should go out in next week (expecting 9 units). After that, plan to have at least one more batch (expecting 10 units, ordered today parts from China).
I went over this thread and my IM inbox and collected the names of people that were interested to get one in order of request. If you are still interested, please send me a message with your shipping address.
@Sotidii
@ccs86
@Duke23
@PCR
@akstrfn
@rtuinila
@droftarts (Not sure if you are interested, or waiting for the screen)
@fma
@PastThePoint (Not sure if you are still interested)
@lbiÂ
@beano
@bot
@Sindarius
@skrotzÂ
@GeorgeM -
@zapta OK!buy an Amazon card?
-
Is there any possibility to sign up on the wait list?I like to have one of those analyzer
Thanks
-
@sotidii, yes, please do, and make sure to purchase at http://amazon.com, and not from international amazon websites. (no need to create a new account, international accounts are good at http://amazon.com).
I do have 9 units ready. Shipping boxes are on on order, should arrive in few days.
@1ri, I added you to the list.
-
Gift card sent, thanks!
-
@zapta
It seems to me that @duke23 is me and there was a small mistake in the nickname but I sent you a gift card and shipping address
-
@dudek23, yes, that's you. I copied it manually and didn't understand why the forum software didn't convert it to a link.
-
@zapta Gift card sent, OK?
-
Gift card sent via private chat
-
