Additional temp graph items
-
@phaedrux I think, he means a connected Raspberry or something similar...
-
@cosmowave Ah yes, I think you're right.
In that case your most direct option might be adding a thermistor to the pi cpu package to monitor, though I could see that being a plugin candidate in future. Anyone care to write it?
-
@phaedrux said in Additional temp graph items:
@cosmowave Ah yes, I think you're right.
In that case your most direct option might be adding a thermistor to the pi cpu package to monitor, though I could see that being a plugin candidate in future. Anyone care to write it?
Monitoring the CPU temp is simple but adding additional data to the graph is the point
-
@martinnyhc
Once you have defined the thermistor in config.g, you can click 'extras' in the tool window of DWC and select the new PI-temp sensor -
@o_lampe said in Additional temp graph items:
@martinnyhc
Once you have defined the thermistor in config.g, you can click 'extras' in the tool window of DWC and select the new PI-temp sensorYes I know, but I would like to display data that deosn't come from a hardware sensor but for example from a script on the SBC.
-
@martinnyhc yea, its currently only items configured using M308.
Maybe @chrishamm can add it to his wishlist for the SBC? -
@jay_s_uk upvoting this - having SBC temperature displayed in DWC along with MCU would be very useful.
-
Does anyone know why the "Drivers" for both a 6HC and 3HC show 0, when they are configured? Maybe I'm missing something?
This is what I have in config.g
M308 S11 Y"drivers" A"6HC Steppers" M308 S13 Y"drivers" P"1.dummy" A"3HC Steppers"Thanks
-
@rushmere3d What are you expecting the drivers to show? The TMC driver temperature output does not show the actual temperature it is just a status report that basically says ok, hot, too hot. see: https://forum.duet3d.com/topic/18390/driver-temperature-display
-
@gloomyandy oh ok, yeah I was expecting an actual temperature. Thanks.
