Software bundle 3.4.1RC1 now available

Del87

@dc42 typo in changelog
M952 nonlinear extrusion (must be M592)

btw it is possible to add more decimal places to the A coefficient?

T3P3Tony

@del87 said in Software bundle 3.4.1RC1 now available:

M952 nonlinear extrusion (must be M592)

fixed this, thanks

T3P3Tony

I would also encourage the use of the ReleaseMgr plugin by @MintyTrebor to help with highlighting the changes in the release notes that match your duet configuration.

comments/notes here: https://forum.duet3d.com/topic/27582/releasemgr-dwc-plugin-v0-01-13-17-03-22

Alex.cr

Are the standard plugins getting updates as well to keep them usable?
Mainly speaking about closed loop and Input shaper.

BoA

I uploaded to Duet3 standalone, and board no longer starts. I think I need to find some recovery from this state.
Update from 3.4 -> 3.4.1RC1

Edit. Restored 3.4 with bossa, flashed 3.4.1rc1 again - no issues this time. So some kind of a glitch

jay_s_uk

@boa i had an issue with 3.4 where the firmware got wiped from the board.
plug a USB in and see if a BOSSA port appears. If so, reflash the firmware

chrishamm

@alex-cr There is no need to update them because they target 3.4 and not 3.4.0. If you run into problems, try to download and reinstall the affected plugin(s).

oozeBot

@dc42 We finally had time to install this on a machine. No issues so far, but testing has just begun. Something we'd really like to see addressed in 3.4.1 is fixing job progress when thumbnails are used as the current calculation appears to count the thumbnails as part of the print job, skewing the results.

dc42

@oozebot said in Software bundle 3.4.1RC1 now available:

@dc42 We finally had time to install this on a machine. No issues so far, but testing has just begun. Something we'd really like to see addressed in 3.4.1 is fixing job progress when thumbnails are used as the current calculation appears to count the thumbnails as part of the print job, skewing the results.

This should only be an issue when the print file is small. It won't be changed in 3.4.1 but is already on the list for 3.5.

oozeBot

@dc42 Thanks for the response. I do want to point out that it does affect larger jobs as well when multiple thumbnails are embedded. However, this isn't a showstopper - just something we'd like to see addressed soon as we really like the thumbnail feature!

Alex.cr

@chrishamm said in Software bundle 3.4.1RC1 now available:

@alex-cr There is no need to update them because they target 3.4 and not 3.4.0. If you run into problems, try to download and reinstall the affected plugin(s).

After reinstall they worked again. Thanks for the help!

Exerqtor

@chrishamm said in Software bundle 3.4.1RC1 now available:

@alex-cr There is no need to update them because they target 3.4 and not 3.4.0. If you run into problems, try to download and reinstall the affected plugin(s).

Having issues with the 3.4.0-b1 input shaping plugin not wanting to install on DWC 3.4.1-rc1 for some reason

EDIT: found out that the plugin was looking for DWC 3.4.0, changed it to 3.4 and repacked it so now it works

CR3D

@dc42

it still contains the following BUG:

https://forum.duet3d.com/topic/27288/rrf-3-4-beta-7-tool-offsets-issue

Regards Christian (CR-3D)

jay_s_uk

@cr3d no it doesnt

CR3D

@jay_s_uk

do you know the solution?

I have made a video today...

dc42

@cr3d I have replied to the thread that you linked to.