Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    ONE PING ONLY --- M42

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    4
    20
    817
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • tecnoundefined
      tecno @tecno
      last edited by

      @jay_s_uk said in ONE PING ONLY --- M42:

      @tecno maybe 0.5s is too long, try reducing to P100
      Otherwise it sounds like you might need to add something to pull it back down to ground once released?

      Take away the 1K serial resistor on output?

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @tecno
        last edited by

        @tecno dunno, i'm not really an electronics guy

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        tecnoundefined 1 Reply Last reply Reply Quote 1
        • tecnoundefined
          tecno @jay_s_uk
          last edited by

          @jay_s_uk said in ONE PING ONLY --- M42:

          @tecno dunno, i'm not really an electronics guy

          Tested = same issue 😉

          Hopefully sombody else chimes in ta advice what to try next.

          Thanks !

          fcwiltundefined 1 Reply Last reply Reply Quote 0
          • fcwiltundefined
            fcwilt @tecno
            last edited by

            @tecno

            What are the specs on the device you have connected to that output?

            What does it expect to see in the way of signal voltage and duration?

            Frederick

            Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

            tecnoundefined 1 Reply Last reply Reply Quote 0
            • tecnoundefined
              tecno @fcwilt
              last edited by tecno

              @fcwilt said in ONE PING ONLY --- M42:

              @tecno

              What are the specs on the device you have connected to that output?

              What does it expect to see in the way of signal voltage and duration?

              Frederick

              The IO output goes go GND to trigger camera ( switch is NO and swithes to ground )

              https://forum.duet3d.com/topic/23976/mini5-bt-dongle-for-transmit/19

              jay_s_ukundefined 1 Reply Last reply Reply Quote 0
              • jay_s_ukundefined
                jay_s_uk @tecno
                last edited by

                @tecno can you change the M950 to

                M950 P0 C"^io1.out" Q1
                

                Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                tecnoundefined 1 Reply Last reply Reply Quote 0
                • tecnoundefined
                  tecno @jay_s_uk
                  last edited by

                  @jay_s_uk said in ONE PING ONLY --- M42:

                  @tecno can you change the M950 to

                  M950 P0 C"^io1.out" Q1
                  

                  Tried that still same issue with serial 1K, will test with no serial 1K

                  tecnoundefined 1 Reply Last reply Reply Quote 0
                  • tecnoundefined
                    tecno @tecno
                    last edited by

                    @fcwilt @jay_s_uk

                    IT WORKS NOW !!!

                    ;Camera trigger
                    M950 P0 C"!io1.out" Q1

                    Thank you guys, this forum is so helpful !

                    fcwiltundefined alankilianundefined 2 Replies Last reply Reply Quote 4
                    • fcwiltundefined
                      fcwilt @tecno
                      last edited by

                      @tecno said in ONE PING ONLY --- M42:

                      @fcwilt @jay_s_uk

                      IT WORKS NOW !!!

                      ;Camera trigger
                      M950 P0 C"!io1.out" Q1

                      Thank you guys, this forum is so helpful !

                      Glad to hear you got it working.

                      Do you understand why you needed that ! character?

                      Frederick

                      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                      tecnoundefined 1 Reply Last reply Reply Quote 0
                      • alankilianundefined
                        alankilian @tecno
                        last edited by

                        @tecno

                        Excellent.

                        I did say:

                        I would put a series resistor inline.
                        Maybe 100 Ohms to 1,000 Ohms and try it.
                        

                        So I was already thinking 1,000 Ohms might be too large.

                        I'm glad you stuck with the experiments and got it working!

                        SeemeCNC Rostock Max V3 converted to V3.2 with a Duet2 Ethernet Firmware 3.2 and SE300

                        tecnoundefined 1 Reply Last reply Reply Quote 0
                        • tecnoundefined
                          tecno @fcwilt
                          last edited by

                          @fcwilt said in ONE PING ONLY --- M42:

                          @tecno said in ONE PING ONLY --- M42:

                          @fcwilt @jay_s_uk

                          IT WORKS NOW !!!

                          ;Camera trigger
                          M950 P0 C"!io1.out" Q1

                          Thank you guys, this forum is so helpful !

                          Glad to hear you got it working.

                          Do you understand why you needed that ! character?

                          Frederick

                          This inverts the signal and by that the level rises above the trigg point in the BT circuit, right?

                          fcwiltundefined 1 Reply Last reply Reply Quote 0
                          • tecnoundefined
                            tecno @alankilian
                            last edited by

                            @alankilian said in ONE PING ONLY --- M42:

                            @tecno

                            Excellent.

                            I did say:

                            I would put a series resistor inline.
                            Maybe 100 Ohms to 1,000 Ohms and try it.
                            

                            So I was already thinking 1,000 Ohms might be too large.

                            I'm glad you stuck with the experiments and got it working!

                            Experiments are always good as long one tries to follow good practis, in my case ask questions frequently.

                            Thanks for guidance!

                            1 Reply Last reply Reply Quote 1
                            • fcwiltundefined
                              fcwilt @tecno
                              last edited by

                              @tecno said in ONE PING ONLY --- M42:

                              @fcwilt said in ONE PING ONLY --- M42:

                              @tecno said in ONE PING ONLY --- M42:

                              @fcwilt @jay_s_uk

                              IT WORKS NOW !!!

                              ;Camera trigger
                              M950 P0 C"!io1.out" Q1

                              Thank you guys, this forum is so helpful !

                              Glad to hear you got it working.

                              Do you understand why you needed that ! character?

                              Frederick

                              This inverts the signal and by that the level rises above the trigg point in the BT circuit, right?

                              Correct.

                              Without that ! character the normal state of the output is low which is the state that triggers the camera. Adding that ! character makes the normal state of the output high.

                              Frederick

                              Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                              1 Reply Last reply Reply Quote 2
                              • First post
                                Last post
                              Unless otherwise noted, all forum content is licensed under CC-BY-SA