@zapta could you please change the script that it can handle negative coordinates in --meshable ?
This will make it usable for Delta printers, because
"For Cartesian printers, specify minimum and maximum X and Y values to probe and the probing interval. For Delta printers, specify the probing radius. If you define both, the probing area will be the intersection of the rectangular area and the circle. "
https://duet3d.dozuki.com/Wiki/Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid

Thank you

@zapta thank you for the effort, but ist does not work yet
only defining the default meshable area within the script (line 50) by

default="-185:185,-185:185"

works,
but when adding

<path to your python3> <path_to_the_duet3d_automesh.py file> --meshable "-185:185,-185:185"

to the Post-processing script, it fails

@DK90 the space in "Program Files" leads to this error
change it to

C:\Users\Dominic\AppData\Local\Programs\Python\Python36-32\python.exe "C:\Program Files\Prusa3D\PrusaSlicer\duet3d_automesh.py"

notice the "

@zapta thank you

@Baenwort said in Cura Script to Automatically Probe Only Printed Area:

Does this bring it closer to working for Delta's? Or at least probing a square area of the circular bed?

Yes, this makes it usable for delta's, because
"For Cartesian printers, specify minimum and maximum X and Y values to probe and the probing interval. For Delta printers, specify the probing radius. If you define both, the probing area will be the intersection of the rectangular area and the circle. "
https://duet3d.dozuki.com/Wiki/Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid

@Veti Thank you so much!
It works!

@Veti

tried M672 S131:131 without success - even no flashing of the LED

and before you're asking

;### Z-Probe ###
M558 P8 R0.2 F1200 H2 C"zprobe.in"
G31 P100 X0 Y0 Z-0.19           		; Set Z probe trigger value, offset and trigger height             
M557 R180 S40                          		; Define mesh grid

yes, but it's there since I received it and it is only on the lacquer coat

Wiring is ok - worked for months
Updated RRF a few days ago, but not yesterday
Working last night at last

Sep '19 at filafarm.de
I've already sent them a mail

I've already inspected the whole effector with a magnifying glass
There is nothing abnormally

Thanks, but that is not the only thing that I tried several times but without any success.

Hi,
since today my smart effector seems to be faulty.
It continuously triggers even with the board alone (without heatsink, arms, fans ..), green trigger light and 1000 value in web control.
It flashes three times when turned on and then lights green all the time.
I can't see any damage

HELP

Thanks
Thomas

@dc42 Take your time.