@Phaedrux Return initiated and shipping shortly!!
This has been one of the best trouble shooting and return process I have ever had. Top notch and thanks you very much!
Best posts made by airscapes
-
RE: Duet 2 Ethernet WC 3.3.0 crashes, have to reset to reconnect
-
RE: Duet 2 mounted inside heated enclosure
@phaedrux I will have the board in a printed enclosure with active cooling fan like the Rambo. The enclosure has a small heater but is undersized on it's own but when the bed is set to 110C it keeps it at 100F with thermostatic control.
-
RE: Tiny dimples on print surface (not Z-seam)
I always print PETG at 230-235 any hotter and we get water pops unless the roll was just dried.. New rolls will sometimes need to be dried.. good luck finding the root cause
-
RE: Duet 2 Ethernet WC 3.3.0 crashes, have to reset to reconnect
@Phaedrux Connection dropped once after replacement.. does not look like that fixed it.. Workaround using usb to disable/enable networking did work. I give up!
Will just live with it unless it starts happening much more frequently. Can't trouble shoot if it can not be reproduced on demand.. -
RE: Power Supply wiring question
@fcwilt said in Power Supply wiring question:
Yes - just double, no triple check your work before applying power. It's really hard to get the "magic smoke" back in.
Frederick
As an auto mechanic from a former career, I learned that lesson early on..
-
RE: X shifted 4mm away from 0 when printing max size
@Phaedrux No it is not, so I went ahead and bent the arm of the switch moving the nozzle to the left a couple of mm which now produces a center build area on the plate. Sorry for wasting your time, I did not think that this would be the way to fix the problem but I guess since it seems to work, it is!
-
RE: Duet 2 Ethernet WC 3.3.0 crashes, have to reset to reconnect
@Phaedrux I have installed the new Network Module. This second board has only failed 3 times that I know of making it very hard to diagnose. I did take photos of the solder joints of the header to board on both the old and new module as well as the top and bottom of the main board. I also looked a the surface mounted components on the module .. none of the joints look like they were cold or had large amounts of inclusions.. The photos are here.
Photos of Solder joints magnified
Now the waiting .. -
RE: Which Crimpers for Duet 2
@jay_s_uk said in Which Crimpers for Duet 2:
@airscapes I also use a PA-09 for pretty much everything except duet 3 motor connections. I've even crimped the tiny toolboard CAN-FD connections with the PA-09 with 100% success rate
Ok, sounds good, I really don't plan to do much after this one upgrade, but I am a tool guy (used to be an auto mechanic before getting into Unix admin work 25 years ago) I will probably need to be buried in shipping container with all this stuff nobody in the family will want! Just incase I have to work in the afterlife!
An probably not the fat fingers as much at the Old eyes and no magnifier where I am working! PA0-09 ordered.. others going back! -
RE: During Bed Probe G29
@jay_s_uk Thanks, Yes, I just positioned the machine to one of those points and I now I get it! I will update my macros to only include what the probe can reach, or at least make a note to myself to ignore those next time..
-
RE: Duet 2 Ethernet WC 3.3.0 crashes, have to reset to reconnect
@Phaedrux
Hey, just removed a part from the bed, without moving it, just a smack with a wooden handle, came back to desk and duet disconnected.. really thought I had figured this out but bed movement is not what is doing it.. would explain why I can not reproduce it on demand by moving the bed.. -
RE: BLTouch Duet 2 Makergear M2 End stop switch??
@Phaedrux Excellent explanations and exactly what I was not grasping, that make perfect sense now!! As you could tell I was fixated on the bed changing height since I had to deal with that compensation manually without the probe. probe to nozzle offset does not change other than the heat of the nozzle vs cold.
It is little details like that that those main instructions are missing. They are more quick reference to get you going but not detailed on "how it works" which I do understand since there are lots of different probes and printers.
Thanks again, I have to find some time to get back to the printer and spend a few hours to get it finished. -
RE: Pause Printing for Nut/Magnet insert
@deckingman My apologies, that was exactly what I needed, but took a bit more searching and test print to figure out how to implement it
In the S3D post processing box
{REPLACE "; layer 29" "M226/n; layer 29"}
Caveat is that the layer number must specify the layer to stop before it prints.. i.e. to stop after Layer 28 you have to enter 29..
Print head move to park as if you hit pause on the gui and once you are ready, hit resume. .. for those who come later looking for the same thing
Thanks!
Doug -
RE: How To upgrade DWC
@Exerqtor Ah.. all the way at the end.. I knew it was simple and just an upload but has been a while.. just figured that would be at the top of the doc or pinned someplace Hopefully I will remember next year!!!
Thanks for the quick response to a simple question.. I did know it would be simple and was reluctant to ask
Have a great holiday and a happy new year!
Doug