Topics created by Brian_K

Thanks, that's the reason I'm being cautious, 5v rail disintegrated last time (warranty replacement).

It is with great pleasure that I can inform fellow forum members that the printer is now functioning as expected. Setting the endstops to active high at the low end did indeed do the trick.

For reference the endstop LED’s are on and go off when the switches are activated.

Many thanks one and all for your input.

Excellent, many thanks.

@sebkritikel and to add insult to injury, wire order and colors are depending on the lot you get.

@xtl said in Creality Ender 5 Configuration:

I presume that looks sane?

The D value for the bed heater (1.2 seconds) looks suspiciously low, although low values are not unusual if you are using a silicone heater with a built-in thermistor. I suggest you heat the bed to printing temperature, then watch the temperature carefully to see whether it is stable. If you see it oscillating regularly above and below the set temperature, try a larger D value such as 5. The other parameters look normal to me.

What he said 😏