Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. button
    • Profile
    • Following 1
    • Followers 0
    • Topics 9
    • Posts 30
    • Best 6
    • Controversial 0
    • Groups 0

    button

    @button

    7
    Reputation
    9
    Profile views
    30
    Posts
    0
    Followers
    1
    Following
    Joined Last Online

    button Unfollow Follow

    Best posts made by button

    • First own designd and builded 3d printer with duet of course

      Hi! I'm new here and I would like share with you my 3rd, but 1st, designed and builded from beginning to the end by my 3d printer.
      Shaping from marlin to reprap was nightmare for me (I was writing some codes for Arduino so C was closer then gcode) but now I need to say - it's the best ecosystem ever made!!!

      Some about printer - cartesian style, 2 Y motors, temporary 2 Z Motors. When was designing it main point was to have solid mounted bed (with springs of course). So I have 2x 0,72Nm Z Motors (ordered 2 more for independent screw leveling), 2x 0,45Nm Y motor and 1x 0,45Nm X motor. Extruder is direct drive Mellow wind with pancake motor and volcano hotend.

      I'm adding also my config.g file and would like to ask you - do you have any advice what to change?

      How find maximum accelerations and jerk values for X Y and E Motors? Do you have any way to do that?

      ; Configuration file for Duet WiFi (firmware version 3)
      ; executed by the firmware on start-up
      ;
      ; generated by RepRapFirmware Configuration Tool v3.1.4 on Wed Oct 21 2020 21:24:32 GMT+0200 (czas środkowoeuropejski letni)
      
      ; General preferences
      G90                                            ; send absolute coordinates...
      M83                                            ; ...but relative extruder moves
      M550 P"Duet3D"                                 ; set printer name
      
      ; Network
      M551 P"duet3d"                                 ; set password
      M552 S1                                        ; enable network
      M586 P0 S1                                     ; enable HTTP
      M586 P1 S0                                     ; disable FTP
      M586 P2 S0                                     ; disable Telnet
      
      ; Drives
      M569 P0 S0                                     ; physical drive 0 goes backwards
      M569 P1 S1                                     ; physical drive 1 goes forwards
      M569 P2 S0                                     ; physical drive 2 goes backwards
      M569 P3 S1                                     ; physical drive 3 goes forwards
      M569 P4 S0  								   ; physical drive 4 goes backwards
      M584 X3 Y0:1 Z2 E4                             ; set drive mapping
      M350 X16 Y16 Z16 E16 I1                        ; configure microstepping with interpolation
      M92 X53.33 Y53.33 Z400.00 E415.00              ; set steps per mm
      M566 X900.00 Y900.00 Z300.00 E2000             ; set maximum instantaneous speed changes (mm/min)
      M203 X15000.00 Y15000.00 Z1500.00 E6000.00     ; set maximum speeds (mm/min)
      M201 X700.00 Y700.00 Z100.00 E5000.00          ; set accelerations (mm/s^2)
      M906 X800 Y800 Z1400 E650 I30                  ; set motor currents (mA) and motor idle factor in per cent
      M84 S30                                        ; Set idle timeout
      
      ; Axis Limits
      M208 X0 Y-4 Z0 S1                              ; set axis minima
      M208 X296 Y310 Z300 S0                         ; set axis maxima
      
      ; Endstops
      M574 X1 S1 P"xstop"                            ; configure active-high endstop for low end on X via pin xstop
      M574 Y2 S1 P"ystop"                            ; configure active-high endstop for high end on Y via pin ystop
      M574 Z1 S1 P"zstop"                            ; configure active-high endstop for low end on Z via pin zstop
      
      ; BL-touch
      M950 S0 C"duex.pwm5"                           ; create servo pin 0 for BLTouch
      M558 P9 C"^zprobe.in" H5 F60 T6000             ; set Z probe type to bltouch and the dive height + speeds
      G31 P500 X-25 Y-31 Z0.90                       ; set Z probe trigger value, offset and trigger height
      M557 X0:271 Y5:279 P9                          ; define mesh grid
      M671 X-3:310:310:-3 Y12:12:325:325 P0.8	       ; set position of bed screws
      
      ; Heaters
      M308 S0 P"bedtemp" Y"thermistor" A"HeatBed" T100000 B4138 				; configure sensor 0 as thermistor on pin bedtemp
      M950 H0 C"bedheat" T0                          						; create bed heater output on bedheat and map it to sensor 0
      M307 H0 B1 S1.00                               						; enable bang-bang mode for the bed heater and set PWM limit
      M140 H0                                        						; map heated bed to heater 0
      M143 H0 S150                                  						; heatbed max temp
      M308 S1 P"e0temp" Y"thermistor" A"HotEnd" T4606017 B5848 C5.548428e-8 H3		; configure sensor 1 as thermistor on pin e0temp 
      M950 H1 C"e0heat" T1                         						; create nozzle heater output on e0heat and map it to sensor 1
      M307 H1 B0 A580.4 C256.6 D6.4 S1.00	                        			; disable bang-bang mode for heater  and set PWM limit
      M143 H1 S350										; hotend max temp
      M308 S2 P"e2temp" Y"thermistor" A"PowerSupply" T98640 B4632.86 C9.4861662E-08  		; configure sensor 2 as thermistor on pin e2temp
      M308 S10 Y"mcu-temp" A"MCU"								; MCU temp
      M308 S11 Y"drivers" A"Steppers"								; steppers temp
      
      ; Fans
      M950 F0 C"fan0" Q500                           ; create fan 0 on pin fan0 and set its frequency
      M106 P0 C"PrintFan" S0 H-1                     ; set fan 0 name and value. Thermostatic control is turned off
      M950 F1 C"duex.fan3" Q500                      ; create fan 1 on pin duex.fan3 and set its frequency
      M106 P1 C"Extruder" S0 H1 T45                  ; set fan 1 name and value. Thermostatic control is turned on
      M950 F2 C"duex.fan4" Q500                      ; create fan 2 on pin duex.fan4 and set its frequency
      M106 P2 C"PowerSupply" S0 H2 T40               ; set fan 2 name and value. Thermostatic control is turned on
      M950 F3 C"duex.fan5" Q500                      ; create fan 3 on pin duex.fan5 and set its frequency
      M106 P3 C"Case 1" S0 H2 T45                    ; set fan 3 name and value. Thermostatic control is turned on
      M950 F4 C"duex.fan6" Q500                      ; create fan 4 on pin duex.fan6 and set its frequency
      M106 P4 C"Case 2" S0 H10:11 T45		       ; set fan 4 name and value. Thermostatic control is turned on
      M950 F5 C"duex.fan7" Q500                      ; create fan 5 on pin duex.fan7 and set its frequency
      M106 P5 C"Mainboard" S0 H10:11 T40             ; set fan 5 name and value. Thermostatic control is turned on  
      
      ; Tools
      M563 P0 S"Extruder" D0 H1 F0         	   ; define tool 0
      G10 P0 X0 Y0 Z0                            ; set tool 0 axis offsets
      G10 P0 R0 S0                               ; set initial tool 0 active and standby temperatures to 0C
      
      ; Custom settings are not defined
      
      ; Miscellaneous
      M575 P1 S1 B57600                              			; enable support for PanelDue
      M912 P0 S-7				   			; MCU temp correction
      M501								; read config-override
      T0								; tool 0
      T-1								; standby for tool 0
      M144								; bed standby
      M911 S21.5 R23,5 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000"     	; supply lost procedure
      

      I'm uploading few pics - will make update really soon.

      EDIT:
      https://drive.google.com/file/d/1KvQYSPyI2EsomzRFw_yQyI3C68B_1-yx/view?usp=drivesdk
      https://drive.google.com/file/d/1L5FpCCuYJDwqRH-BXOCXZnuW-vVrAeRX/view?usp=drivesdk
      https://drive.google.com/file/d/1LC0kDRp6lUVnkNzL9I6n5yYBfHWGjlpr/view?usp=drivesdk
      https://drive.google.com/file/d/1KvQYSPyI2EsomzRFw_yQyI3C68B_1-yx/view?usp=drivesdk

      posted in My Duet controlled machine
      buttonundefined
      button
    • RE: IDEX Markforged Home All issue

      Did homing separate - working great. THX

      posted in General Discussion
      buttonundefined
      button
    • Donation for Duet dev team

      Hi!
      Is there any paypal/patreon etc. Where people could send cash to help developing duet ecosystem?

      Funding Marlin is easy - there is something about on the main page but it's hard to find any info for Duet and reprap firmware

      posted in Off Topic
      buttonundefined
      button
    • RE: Destroyed USB port - how add another wifi

      @button
      Ok, I enabled support for paneuldue in config.g and comunication via bossa works over paneldue uart 🙂

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Orca slicer and Duet

      I'm using OrcaSlicer for 3 months and pirint looks briliant. Same settings, copied from SuperSlicer and quality is flawless

      posted in General Discussion
      buttonundefined
      button
    • RE: Destroyed USB port - how add another wifi

      @droftarts
      I'm using usb to uart converter connected with jumper wires to paneldue connector on duet2wifi.

      Ps. Yes, sorry, i meant YAT

      posted in Duet Hardware and wiring
      buttonundefined
      button

    Latest posts made by button

    • RE: Orca slicer and Duet

      I'm using OrcaSlicer for 3 months and pirint looks briliant. Same settings, copied from SuperSlicer and quality is flawless

      posted in General Discussion
      buttonundefined
      button
    • 12864 display Menu system

      Hi guys.
      Finaly have some time to fix some things in my Voron v0.1.
      I have 12864 display connected to Duet3Mini.
      I'm using Ultimate Duet Menu System and wanted to change some behaviors but discovered that is duet limitation, not menu system:

      ; Bed Temp
      image R14 C25 L"imgs/bed.img"
      alter R14 C40 N180 W20 H2
      text T" / "
      value N80 W20
      text T"°C"
      
      ; Hotend Temp
      image R26 C25 L"imgs/temp.img"
      alter C40 N100 W20 H2
      text T" / "
      value N0 W20
      text T"°C"
      

      When setting up bed heater active temp, bed getting active (from standby) When setting temp to 0 in web interface is showing -272 (and somehow i can set temp to -xxx value).

      When setting nozzle/tool active temperature tool not getting active (i must add extra button to make this took active). When i set temp to 0, took getting OFF. Why?

      Is there an option to:

      • use conditional Gcode in menu files?
      • adding extra behaviors to "alter" component? (If temp is lower then eg 20 put tool to standby, not off)
      posted in General Discussion
      buttonundefined
      button
    • RE: Destroyed USB port - how add another wifi

      @droftarts
      I'm using usb to uart converter connected with jumper wires to paneldue connector on duet2wifi.

      Ps. Yes, sorry, i meant YAT

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Destroyed USB port - how add another wifi

      @Phaedrux yes, was also and option for us, but when i told to my friend "remember to enable paneldue in config" i discovered that this was the thing we missed to comunnicate via usb to uart converter

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Destroyed USB port - how add another wifi

      @button
      Ok, I enabled support for paneuldue in config.g and comunication via bossa works over paneldue uart 🙂

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • Destroyed USB port - how add another wifi

      Hi.
      Friend of mine destroyed USB socket on his Duet WiFi board. We must connect the printer to another network - how to send proper comands?
      We were trying to do that via PanelDue port, but board is not responding. Also adding M552 etc comand at the end of config.g doing nothing. Do You have any ideas how to do that?

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Dual motor extruder with 1 nozzle

      @deckingman
      I was thinking about loosing sync between both motors and eg. building pressure in bowden tube because one motor will be going faster (steps set correctly)

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Dual motor extruder with 1 nozzle

      @wwak84
      But problem is that my main question was about 2 extruders pushins same filament to 1 nozzle

      Oh, and i cant tell machine where it should start prinitng because eg tool 0 was printing object 1, and tool 1 starting printing from object 3.

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Dual motor extruder with 1 nozzle

      @wwak84
      From the begining:
      You're printing with tool0, then coming T1 command from slicer - and tfree0 macro is called and tpost1. In macro tfree0 you gave eg G1 Z2 line. In tpost1 you cant gave G1 Z-2 because you'll move head down before it reach printing position in XY. Machine to move T1 head to the printing coordinates in X and Y and then lower gantry in Z. Not before. After XY movement. SuperSlicer not sending Z when you're not using wipe tower (it won't use it)

      posted in Duet Hardware and wiring
      buttonundefined
      button
    • RE: Dual motor extruder with 1 nozzle

      @wwak84 duet with duex has 10 steppers, all in use right now.
      All of tutorials from duet wiki I've done. Its slicer, not duet problem - how RRF could know when lower Z after 1st xy move after toolchange?

      Simulationusly meaning spool->feeding extruder->bowden tube->direct extruder

      posted in Duet Hardware and wiring
      buttonundefined
      button