Topics created by Duet_lover

@T3P3Tony Such a tangential control would be a good feature for part-cooling fans, too!
Instead of blowing air everywhere, we could have a rotating fan shroud, following the nozzle-path and exactly aim towards the fresh filament.
#firmware wishlist

@DocTrucker thanks you

@India Make sure you have updated DWC to the same version as the firmware.

Ian

@India if you want this behaviour on all builds ran on this specific machine add it to your config file. You could also add it to the custom gcode your chosen slicer puts at the beginning of a build file.

Read through the detail for M669 here:

https://docs.duet3d.com/en/User_manual/Reference/Gcodes

@droftarts
https://forum.duet3d.com/post/118277

@India Did you get it working? If so, please let us know, and what steps you took, so the information is here for other people, and so I can mark the thread as solved.

Ian