Topics created by duncan-rtfm

Here's the problem, in config.g:

M305 P0 T9880 B4185 R4700

Change to: M305 P0 T100000 B3950

Similarly for the M305 P1 command. The B3950 is just a guess because the bag doesn't give the B value.

Are the red 5V and green 3.3V LEDs lit? See https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respond.

@Veti said in Maestro - ping yes, web interface no:

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37

Particularly the steps starting here for prepping the SD card: https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+2:+Configuration/38#s135

@duncan-rtfm Sorry to hear you're having such bad luck with wifi.

I think you'll like the Ender 3 and Maestro combo. They are very well matched.

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37

Unfortunately that probably means that the WiFi module has failed. However, if you were running M997 S1 with just USB power applied, try again with VIN power applied.

The WiFi module is one of the easier components to replace. The important part is removing the old one without lifting any PCB traces.

@Phaedrux thanks)