Topics created by gz

@t3p3tony thanks Tony! This seems to be what's happening I'll try it and report back!

I think the Ethernet boards are superior, because they are not constantly disconnecting and if you have an access point on the network, it can be wireless as well.

Typo, I meant the object model. https://duet3d.dozuki.com/Wiki/Object_Model_of_RepRapFirmware

@gz said in Closed loop duet.:

any advice on how to improve that ?

Rigid frame, quality belts and pulleys, quality linear motion hardware. A servo won't solve for a lack of those things either.

sorry for taking so long to answer, i've been hard at work. thanks a lot for the answer i will take the frame and mechanics flexibility into account !

if i remember correctly the outer box was damaged a bit but the inner blue and white one seemed ok that why i was thinking that it could be the heat sink that hit the effector. thanks a lot for your help !