Topics created by LHelge

@lhelge said in Intermittent SD-card funtionality on Duet 3 mini 5+:

SD card 0 detected, interface speed: 0.2MBytes/sec

That’s a sign that the interface isn’t working correctly, should be 25MBytes/sec. See https://duet3d.dozuki.com/Wiki/SD_Card#Section_Troubleshooting_SD_Card_issues

If the socket or processor is faulty but the card is detected, it usually drops to 0.2Mbytes/sec.

I’d recommend replacement.

Ian

That looks slightly amiss to me. As @Phaedrux stated, what you are seeing is the pressure advance coefficient for both drives, even though specified "DO". I just checked on my machine in 3 extruder configuration and in response to M572 D0, I get "Extruder pressure advance: 0.400, 0.400, 0.400" and I get the same response regardless of whether I use simply M572 or M572 Dn (where n can be 0 to 2) so it seems that M572 on it's own reports the pressure advance for all drives and ignores the "D" parameter.

Edit - it's just how pressure advance is reported. You can still change the setting for any individual drive and it will work. In the example above, I entered M572 D0 S0.5. Then entering simply M572 reports back 0.500, 0.400, 0.400. So everything works as it should.

Sounds even better! Then it could be set up in the filament load macro to run the fan different on different printers with the same filament profile in the slicer.

Something similar for hotend and bed temperature would be super as well. Right now I need to have one filament profile in my slicer for each printer due to different temperature needs. It would be cool to be able to override those temperatures as well with a gcode that I can put in my filament load macro.

Yes, I'll have a look at that.

@dc42 Great! will do!

The first batch is in the UK but they need to be tested before we ship them.