Topics created by mike_b

@mike_b I ran mine on a BTT board with external drivers running RRF

Hey @jay_s_uk, awesome, it worked, thanks for your help!

@mike_b having the same issue in sbc mode. I wish there were instructions to manually upload firmware in sbc mode, instead of using M997.

Hey @droftarts and @dc42 - FYI this issue is fixed in the alpha firmware linked by Andy Everitt in the github issue for this bug: https://github.com/Duet3D/RepRapFirmware/issues/1039 Thanks again for all your help on this!

droftarts created this issue in Duet3D/RepRapFirmware closed [Bug]: Motor brake reports error when configured on mainboard used as expansion board #1039

@droftarts thanks for this very detailed write up, and thanks again for putting so much effort into this! I realy appreciate it. Unfortunately I'm dealing with some health issues at the moment but should be able to test in a week or two. Thanks again!

@Phaedrux thanks for the reply, appreciate it! Turns out I was missing the G4 command at the top of my config.g file