Topics created by Superbrain8

@Superbrain8 Okay, sorry about that!

While there are a lot of changes between 3.5 and 3.6, the configs are generally unchanged. I can’t see anything obvious in you config.g, but I’m on my phone at the moment, so easy to miss things. Best to revert for now and I’ll test in the New Year.

Ian

@jay_s_uk didnt really showed up when searching for it, the pinned macros showed up but they are a bit bulky

@Superbrain8 i ran my V1 microprobe on a 1LC with no issues. I can't remember whether I joined grounds or ran them separately

Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.

@dc42 will be a non issue for me in the future, im working on replacing the entire ribbon cable due to its limitations.
will run individual wires, just have to seperate them properly so they wont be close to stepper motor or other higher current wires.

Thanks a lot, this fixed it.

got the this solved, need to home x and y first, will add something to force it into my homez.g file