Topics created by Tobi_innit

@deckingman it really seems to be a matter of construction; I can't say that I had heatcreep related issues even with PLA sitting in the hotend at 230C for half an hour to an hour. But then I don't worry about my 4010 hotend fan noise levels (either by virtue of a lack of good hearing, or because other components of the printer quickly drown out the fan noise as soon as it is printing).

@o_lampe I would say all commercially available all-metal heatbreaks these days come with smooth insides, the early reprapped all metal heatbreaks required more care. But the slice copperhead inspired bimetallic heatbreaks with surgical tubing pressed into copper threads or Ti5.5 based all metal heatbreaks all are smoother than a baby's butt (that's a technical term).

@droftarts @jay_s_uk I changed it to RRF 3.4 and the Plugin was there, thanks. But i still cant get it to run. I connected my USB Webcam, which the Pi recognizes as dev/video0 and tested the webcam by taking a picture with fswebcam, which worked. I followed the instructions until it said "Download the .zip file of the plugin without extracting it, using the version that matches the firmware version of your Duet, from Motion Webcam Plugin". Isnt the Plugin already there? (it was in my External Plugins in my DWC after changing to 3.4) or do i have to add something extra? I can click it but it won´t start. I also installed motion on the Raspberry to try it but it didnt change anything. Any idea what i´m missing?

@Tobi_innit your max speeds in M203 are 100mm/s so you won't print any faster than that