Topics created by usas12

We're here to help!

tpre3.g
; called before tool 3 is selected

;Unlock Coupler
M98 P"/macros/Coupler - Unlock"

;Move to location
G1 X155 Y100 F25000

;Move in
G1 X155 Y125 F25000

;Collect
G1 X155 Y133.3 F2500

;Close Coupler
M98 P"/macros/Coupler - Lock"

;WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!
;if you are using non-standard length hotends ensure the bed is lowered enough BEFORE undocking the tool!
G91
G1 Z60 F1000
G90

;Move Out

Glad to hear it is working.

@o_lampe said in mesh leveling help:

@usas12 said in mesh leveling help:

I've tried adding
; Z-Probe
M558 P7 C"^Zstop" H5 F120 T6000

Maybe it's zstop**.in**?
Just guessing...

Nope. zstop is correct in this case. https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview#Section_Pin_names

SOLVED

M574 Z1 S1 P"zstop"

fixed it

SOLVED, ran it through a switch and detected just fine. Also updated firmware but doubt that was it