Topics created by weed2all

@Ironman777 We recommend 32V maximum for the 6HC v1.01. This gives some headroom for voltage generated by stepper motors coming to a sudden stop.

Ian

when test made with 1/8 I had M92 set to 200...
On most tests at 1/16 I have my M92 set to X400 Y400 Z400

@fcwilt yup that why I asked...seams the 27v will be the right choice getting it up to 31.5v...320watt is sufficient for my cnc...I only power the motors...no heaters, no other thing that need power...maybe a fan to cool the board...though tmc5160 used at 2.2 amp on each motor don't even get worm

@jay_s_uk actually just came across with this.. thank you Jay!

Thank you..

@weed2all said in Duet 2 wifi corexy homing z in middle of the bed issue:

That is a new configuration file made today on reprap configuration tool...why it put the h2 in homez.g and homeall.g?

Known issue. Will be resolved in next update.

PanelDUE works fine on a RADDS board, iirc the pins in the connector had to be rearranged to match the top 4 pins in AUX1. I had to solder pins to AUX1 as well.
Firmware 2.03 works fine so far 🙂

Send: M115 Recv: FIRMWARE_NAME: RepRapFirmware for RADDS FIRMWARE_VERSION: 2.03 ELECTRONICS: RADDS 1.5 FIRMWARE_DATE: 2019-06-13b2

There is a lot of sdcard juggling between the printer and pc when setting it up.