Topics created by Zoltan3D

@Zoltan3D In SBC mode you also have sbc.memory.available + sbc.memory.total for the SBC RAM. The macro dc42 posted should work for the SBC storage device as well.

@moth4017 thanks guys for your help,

So in fact, macros are just normal config commands, but are temporary

@Zoltan3D It's been possible to set the M950 Q value in the configtool, you need to click on the heartbeat icon and then apply the frequency change:

bffdfe9b-cfb2-4da1-80a4-7c8933e37ebd-image.png

ca39b58c-1e89-41a2-b8a2-de803cd38fde-image.png

and just for fun, here is a normal benchy printed on it 😛
IMG20240825183834.jpg
(for now I use 0.8mm nozzle, but sucessfully tested a custom made 1.6mm nozzle 😛

@Zoltan3D As @Phaedrux has said, we need to see your homing files and other files. The most likely cause of the homing failing after a print is cancelled is that in pause.g or cancel.g is a G90 command that sets positioning to absolute and your homing files are lacking a G91 to set the positioning to relative. So instead of moving an axis by a few mm, it tries to move the axis to a position a few mm away from zero.

@Zoltan3D Thanks, now fixed in v3.5.0-rc.2+1.

@Zoltan3D Our list of genuine resellers is here: https://www.duet3d.com/page/genuine-resellers
If you're having problems with a particular one (and they may just be really busy in the run-up to Christmas), please email sales@duet3d.com and let us know.

Ian