@phaedrux said in Autosave for z-calibrate-offset-val:
G30 S-3
YUHUU: a reason for 2.03!
THANKS!
EDIT:
OHNOOOOOOOO
updated to 2.03beta2 and after that just changed "G30 S-1" to "G30 S-3" in my calibration-macro (save&closed) started it and I crashed the head because the threshold-val of the ir-sensor was calibrated for the original aluminium , but I still had that white sheet of paper I used for the calibration lying there (and it has some pretty diffrent values depending on the print-plate-material/print-plate-surface...white/metallic and matte/shiny...)
Retried it with calibrating with the sheet of paper the desired height between nozzle and paper but this time removed the paper from the table before confirming "O.K." to have the sensor read the value on the material that is the real printing-surface-material when saving...
and now:
z-lift & following G30 S-3
IT WORKS like a charm and updates the config-override.g with the adjusted offset-val! (Learned: will have to make the aluminiumplate a bit more matte for more consistent values)
COOL! Thanks! Made my day! (Edit: sorry had to rearrange the phrases to make sense 🙂 it is too late for me today)
How can this be flagged as solved?