Novel/Unusual/Large printer videos wanted

T3P3Tony

We are looking for videos of printers that show what the Duet (+expansion) can do. I will select some short clips of these for the video on our stand at TCT this year.

I will of course credit you!

A link to a youtube or other video hosting platform would be perfect at this point although i may ask for a copy of a section of the original footage if you have it. Either reply here or email me tony@duet3d.com

Thanks!

timothyz

The 3D Potter guys would probably enjoy free advertising (not affiliated with them, but I know they use duet+expansion).

Their stuff is definitely on the weird end of the spectrum, but I'm curious to see what else is posted here.

deckingman

@t3p3tony Tony, I'm guessing you are looking for clips of printers other than mine, as it will be on your stand. But if you don't get much response to this post you can use anything from my YouTube channel (link in my sig). The short 55 second compilation is a bit different as it shows multiple short clips in 4 split screens.

DocTrucker

Perhaps something a little more recent than this one?

@dc42 your old extension shield works fine!

NitroFreak

I guess my 230°C heated chamber printer is sort of unusual? It´s got an auto lifting dual extruder. I won the Solvay AM cup with it, printing PPSU at 400 °C in a ~220°C chamber. Here is the interview, you can see it in the background.
https://www.solvay.com/en/article/2019-am-cup-3d-printing-winners

alt text

here´s a bit of footage from the lifting hotend.
https://www.youtube.com/watch?v=KYCNw_LuCM4&t=38s

What footage exactly are you looking for?

T3P3Tony

@nitrofreak said in Novel/Unusual/Large printer videos wanted:

What footage exactly are you looking for?

I don't want to be too specific as people will come up with great ideas i have not thought about, but somehting that in a few seconds "looks" different, unusual, interesting and not a typical 3d printer. we will have some captions on the video but not sound and it wont really work to have to explain everything.

PaulHew

My RailCore II has a Duet2 and Duex, would that be any good?
Need a little cable tidy but otherwise it is functional

T3P3Tony

@paulhew very possibly. If you have a nice clip of it bed levelling maybe?

mrehorstdmd

In the next few days I'll be installing a Duet WiFi in my sand table- a 1.9 x 1 m corexy machine.

Here's an old video of it running: https://vimeo.com/290296213

I'm in the process of making it run quietly by running high microstepping ratios and gearing up the motors so they turn slowly even as the mechanism moves fast. I'll be shooting some fresh video of it when I have made the changes (mechanical stuff is done- just waiting for the Duet board).

UMMD, my tall corexy printer, is Duet powered. Here's an old video: https://vimeo.com/235837261

T3P3Tony

@mrehorstdmd that is a cool sand table! I would love to use a clip or two once its switched over.

grabercars

This is the Cerberus Gigante Deltabot. 5' x 34" print envelope. I didn't use the expansion board, but I am using Duet2 wifi with external drivers which theoretically 'could' have been connected that way? In any case, it's a cool deltabot project. Currently in operation at Arizona State University in the Grant Street Studios 3D media lab location. I'm the 6'3" shiny headed dude in the photo, for size reference.

First day, delivery!
0_1567548987240_ASU Grant Street Studios Gigante 3D Deltabot.jpg

Or just a big tornado print that was ready when I came back the next morning?
0_1567549352837_ASU Grant Street Studios Gigante 3D Deltabot 2.jpg

oliof

When is TCT exactly? I might set up my SCARA arm again if I have some time to do so.

Dougal1957

@oliof said in Novel/Unusual/Large printer videos wanted:

When is TCT exactly? I might set up my SCARA arm again if I have some time to do so.

24-26 Sept

T3P3Tony

@oliof yep 24-26 september, but we will be putting the video togethe rover the next week or so.

oliof

I'll prioritize it for early next week then (-;

oliof

@T3P3Tony unfortunately, I lost my old config and the new one does exhibit some problems I solved the first time around, but don't remember how .... but I got a nice homing sequence. See https://youtu.be/cRcnrH5-Lzw and decide whether you can use it or not.