Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Bltouch setup need help

    Scheduled Pinned Locked Moved
    Firmware installation
    4
    93
    3.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Elvis0zundefined
      Elvis0z @JoergS5
      last edited by

      @JoergS5
      Yep removed

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        @Elvis0z said in Bltouch setup need help:

        Error: G30: Insufficient axes homed for bed probing

        Just to make sure, the files you are editing are in the /sys folder, right?

        Z-Bot CoreXY Build | Thingiverse Profile

        Elvis0zundefined 1 Reply Last reply Reply Quote 0
        • Elvis0zundefined
          Elvis0z @Phaedrux
          last edited by

          @Phaedrux

          Yep

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by Phaedrux

            Can you upload the actual files to your post? config.g homeall.g homex.g homey.g homez.g deployprobe.g retractprobe.g

            And maybe a photo of your wiring?

            Z-Bot CoreXY Build | Thingiverse Profile

            1 Reply Last reply Reply Quote 0
            • Elvis0zundefined
              Elvis0z
              last edited by

              Not sure what you mean "Actual files" or how to do it not copy paste?

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                In the /sys folder select the files and then right click and download. Then drag the files onto the post text box in the forum to upload.

                Z-Bot CoreXY Build | Thingiverse Profile

                1 Reply Last reply Reply Quote 0
                • Elvis0zundefined
                  Elvis0z
                  last edited by

                  config.g
                  deployprobe.g
                  homeall.g
                  homex.g
                  homey.g
                  homez.g
                  retractprobe.g

                  1 Reply Last reply Reply Quote 0
                  • Elvis0zundefined
                    Elvis0z
                    last edited by

                    Thank you for all the help. I have to go out for a while will be back
                    Cheers

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      Can you send M98 P"config.g" in the gcode console and report the results?

                      Z-Bot CoreXY Build | Thingiverse Profile

                      Elvis0zundefined 1 Reply Last reply Reply Quote 0
                      • Elvis0zundefined
                        Elvis0z @Phaedrux
                        last edited by

                        @Phaedrux yep will do soon as I'm back home

                        1 Reply Last reply Reply Quote 0
                        • JoergS5undefined
                          JoergS5
                          last edited by

                          I am not sure whether it's a problem that retractprobe.g doesn't have a CRLF at the last line.

                          Elvis0zundefined 1 Reply Last reply Reply Quote 0
                          • Elvis0zundefined
                            Elvis0z
                            last edited by

                            M98 P"config.g"
                            HTTP is enabled on port 80
                            FTP is enabled on port 21
                            TELNET is disabled
                            Error: bad model parameters

                            1 Reply Last reply Reply Quote 0
                            • Elvis0zundefined
                              Elvis0z @JoergS5
                              last edited by

                              @JoergS5 CRLF not sure what that is

                              A Former User? JoergS5undefined 2 Replies Last reply Reply Quote 0
                              • A Former User?
                                A Former User @Elvis0z
                                last edited by

                                @Elvis0z carriage return and line feed. In other words press enter.

                                1 Reply Last reply Reply Quote 0
                                • JoergS5undefined
                                  JoergS5 @Elvis0z
                                  last edited by JoergS5

                                  @Elvis0z please try
                                  G31 P25 X41.0 Y10.0 Z0.0
                                  instead of
                                  G31 P25 X+41 Y+10 Z0.0
                                  and run M98 P"config.g" again whether the bad model parameters is still there.

                                  1 Reply Last reply Reply Quote 0
                                  • Elvis0zundefined
                                    Elvis0z
                                    last edited by

                                    HTTP is enabled on port 80
                                    FTP is enabled on port 21
                                    TELNET is disabled
                                    Error: bad model parameters

                                    JoergS5undefined 1 Reply Last reply Reply Quote 0
                                    • JoergS5undefined
                                      JoergS5 @Elvis0z
                                      last edited by

                                      @Elvis0z ok, somewhere is a syntax error in the config.g, but I cannot see it.

                                      1 Reply Last reply Reply Quote 0
                                      • Elvis0zundefined
                                        Elvis0z
                                        last edited by

                                        @JoergS5 said in Bltouch setup need help:

                                        G31 P25 X41.0 Y10.0 Z0.0

                                        Should I have P9 or P25

                                        JoergS5undefined 1 Reply Last reply Reply Quote 0
                                        • JoergS5undefined
                                          JoergS5 @Elvis0z
                                          last edited by JoergS5

                                          @Elvis0z for BLTouch in most cases the value is P25. P9 was the parameter for M558. G31 P25 means sensitivity.

                                          1 Reply Last reply Reply Quote 0
                                          • Elvis0zundefined
                                            Elvis0z
                                            last edited by

                                            Think that I have P9 for the bltouch

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA