Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    hbot homes correctly but prints mirrored ,

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    4
    169
    8.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator @tracar
      last edited by Phaedrux

      @tracar said in hbot homes correctly but prints mirrored ,:

      can not get a response from the bltouch

      And that's using this in your config,g?

      M558 P9 C"^zprobe.in" H2 F100 T8000 A5 ; set Z probe type to bltouch and the dive height + speeds
      M950 S0 C"exp.heater7" ; create servo pin 0 for BLTouch

      If that's what you have in config, and it's wired to the right pin, check the wiring continuity.

      Z-Bot CoreXY Build | Thingiverse Profile

      1 Reply Last reply Reply Quote 0
      • tracarundefined
        tracar
        last edited by tracar

        this is the current config

        ; Z-Probe

        M950 S0 C"exp.heater7" ; create servo pin 0 for BLTouch
        M558 P9 C"^zprobe.in" H5 F120 T24000 ; set Z probe type to bltouch and the dive height + speeds
        G31 P500 X0 Y0 Z0.445 ; set Z probe trigger value, offset and trigger height
        M557 X50:400 Y50:500 S50 ; define mesh grid

        and

        ; deployprobe.g
        ; called to deploy a physical Z probe
        M280 P7 S10 ; deploy BLTouch
        does not work

        continuity of wiring is fine

        peter247undefined 1 Reply Last reply Reply Quote 0
        • peter247undefined
          peter247 @tracar
          last edited by

          @tracar

          BIG HINT ,This works with any heater

          ; deployprobe.g
          ; called to deploy a physical Z probe
          ;
          M280 P0 S10 ; deploy BLTouch
          
          ; retractprobe.g
          ; called to retract a physical Z probe
          ;
          M280 P0 S90 ; retract BLTouch
          
          1 Reply Last reply Reply Quote 0
          • tracarundefined
            tracar
            last edited by

            i have already changed the p0 and still non responsive

            peter247undefined 1 Reply Last reply Reply Quote 0
            • peter247undefined
              peter247 @tracar
              last edited by

              @tracar , what pin are you using .

              1 Reply Last reply Reply Quote 0
              • tracarundefined
                tracar
                last edited by

                @tracar said in hbot homes correctly but prints mirrored ,:

                H7_pwm on the expansion board
                and zprobe in

                peter247undefined 1 Reply Last reply Reply Quote 0
                • peter247undefined
                  peter247 @tracar
                  last edited by

                  @tracar Pin 31 ?

                  tracarundefined 1 Reply Last reply Reply Quote 0
                  • tracarundefined
                    tracar @peter247
                    last edited by

                    @peter247 yes

                    peter247undefined 3 Replies Last reply Reply Quote 0
                    • peter247undefined
                      peter247 @tracar
                      last edited by

                      This post is deleted!
                      1 Reply Last reply Reply Quote 0
                      • peter247undefined
                        peter247 @tracar
                        last edited by

                        This post is deleted!
                        1 Reply Last reply Reply Quote 0
                        • peter247undefined
                          peter247 @tracar
                          last edited by

                          @tracar

                          I can't see anything wrong with the set ups .

                          if you had a Maestro that needs to be set up differently , but you are running a duet 2 wifi , so that doesn't wash .

                          Can only think it's wiring ?

                          1 Reply Last reply Reply Quote 0
                          • tracarundefined
                            tracar
                            last edited by

                            it works if i downgrade firmware

                            peter247undefined 1 Reply Last reply Reply Quote 0
                            • peter247undefined
                              peter247 @tracar
                              last edited by

                              @tracar

                              what is your full zprobe config

                              have you removed the M307 H7 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch

                              tracarundefined 1 Reply Last reply Reply Quote 0
                              • tracarundefined
                                tracar @peter247
                                last edited by

                                @peter247

                                M307 H7 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch
                                M950 S0 C"exp.heater7" ; create servo pin 0 for BLTouch
                                M558 P9 C"^zprobe.in" H5 F120 T6000 ; set Z probe type to bltouch and the dive height + speeds
                                G31 P500 X0 Y40.9 Z.445 ; set Z probe trigger value, offset and trigger height
                                M557 X50:400 Y50:400 S100 ; define mesh grid x50:400 starts at 50, ends at 400 SXX moves by what its set to between points

                                peter247undefined 1 Reply Last reply Reply Quote 0
                                • peter247undefined
                                  peter247 @tracar
                                  last edited by peter247

                                  @tracar

                                  comment out M307 H7 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch

                                  Notes - RepRapFirmware 3

                                  The F parameter is no longer supported. Use M950 to set the frequency in the M950 command that you use to define the heater .

                                  The I2 parameter is no longer supported, and I3 does the same as I1. You can use M950 to invert the output.

                                  You can no longer disable a heater using M307 A-1 C-1 D-1. To use the pin for something else, don't create a heater on that pin.

                                  1 Reply Last reply Reply Quote 0
                                  • tracarundefined
                                    tracar
                                    last edited by

                                    wiring is all good, as i said it works if i downgrade the firmware,
                                    something in the settings..............

                                    peter247undefined 1 Reply Last reply Reply Quote 0
                                    • Phaedruxundefined
                                      Phaedrux Moderator
                                      last edited by

                                      Can you put up your full config.g?

                                      Z-Bot CoreXY Build | Thingiverse Profile

                                      peter247undefined tracarundefined 2 Replies Last reply Reply Quote 0
                                      • peter247undefined
                                        peter247 @Phaedrux
                                        last edited by peter247

                                        This post is deleted!
                                        1 Reply Last reply Reply Quote 0
                                        • peter247undefined
                                          peter247 @tracar
                                          last edited by

                                          @tracar

                                          have you commented out M307 H7 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch

                                          Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                          • Phaedruxundefined
                                            Phaedrux Moderator @peter247
                                            last edited by

                                            @peter247 said in hbot homes correctly but prints mirrored ,:

                                            M307 H7 A-1 C-1 D-1

                                            Will just be ignored in RRF3.

                                            If you send M98 P"config.g" do you get any errors echoed back?

                                            Z-Bot CoreXY Build | Thingiverse Profile

                                            tracarundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA