Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    What firmware version are you using?

    Scheduled Pinned Locked Moved
    General Discussion
    31
    47
    3.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • oliofundefined
      oliof
      last edited by oliof

      there is no LTS release. The recommendation so far always was to use the latest stable release (i.e. 3.2.2 right now). In practice, if you are on a release that works for you, there is no need to update. Unless there is (-:

      <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

      1 Reply Last reply Reply Quote 0
      • martin7404undefined
        martin7404
        last edited by

        On a modified China corexy I run 2.05 and on new Muldex build yesterday 3.11, today 3.2 and at the moment rolling back as far 3.2 have major issues with tool change on my IDEX

        Muldex IDEX Duet2+Duex5
        Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
        Sapphire Pro with Duet2, with closed-loop motors
        custom high temp E3D tool changer with Duet2+Duex

        o_lampeundefined 1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator @zapta
          last edited by

          @zapta said in What firmware version are you using?:

          I am on 3.1.1 (2020-05-19b2).

          Does duet3d have any recommendation on what version we should use if want long term support without having to upgrade to each new release?

          Ride the wave!

          Z-Bot CoreXY Build | Thingiverse Profile

          zaptaundefined 1 Reply Last reply Reply Quote 0
          • zaptaundefined
            zapta @Phaedrux
            last edited by

            @Phaedrux said in What firmware version are you using?:

            Ride the wave!

            My printer is pretty stable and useful these days so my focus shifted from the printer itself to what I am creating with it.

            Phaedruxundefined 1 Reply Last reply Reply Quote 1
            • Phaedruxundefined
              Phaedrux Moderator @zapta
              last edited by

              @zapta well understood. Keep an eye on the release notes to see if anything is relevant to you. Now that rrf3 is maturing more features and improvements are on the way.

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • o_lampeundefined
                o_lampe @martin7404
                last edited by

                @martin7404 said in What firmware version are you using?:

                3.2 have major issues with tool change on my IDEX

                Is there a separate thread about it?
                I got pushed to upgrade from 2.05 to 3.2.
                But now that I'm in the process of building my own tool changer, I am concerned reading this note from you...

                1 Reply Last reply Reply Quote 0
                • martin7404undefined
                  martin7404
                  last edited by

                  Most probably it is some mistake in panel due manual operation, that made me change from - to + tool offset. It seems it is ok now

                  Muldex IDEX Duet2+Duex5
                  Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
                  Sapphire Pro with Duet2, with closed-loop motors
                  custom high temp E3D tool changer with Duet2+Duex

                  1 Reply Last reply Reply Quote 1
                  • oliverracingundefined
                    oliverracing
                    last edited by

                    Currently running 2.05 on both my machines, but plan on switching to whatever is latest at the time when changing the kinematics of the portable printer (currently polar swing-arm but it's a bit flexy, changing it to corexy).

                    Main printer is hooked up to looks of external stuff and using outputs for things that they probably shouldn't be so will have to rethink before upgrading as that's a big job and it's currently working!

                    1 Reply Last reply Reply Quote 0
                    • GeneRisiundefined
                      GeneRisi
                      last edited by

                      How well does the RRF3 firmware run on the Duet2? It has less compute power than the Duet3, so, while I know it is possible, does it handle conditional gcode well, or is it underpowered?

                      Phaedruxundefined NeoDueundefined 2 Replies Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator @GeneRisi
                        last edited by

                        @GeneRisi said in What firmware version are you using?:

                        How well does the RRF3 firmware run on the Duet2? It has less compute power than the Duet3, so, while I know it is possible, does it handle conditional gcode well, or is it underpowered?

                        It runs it perfectly fine. There are no limitations or draw backs running RRF3 on the Duet2 series boards. Even the Maestro.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 0
                        • Diamondbackundefined
                          Diamondback
                          last edited by

                          Yep I can confirm that, been running RRF3 since it came out on my Duet 2 Wifi and there is nothing negative about it. Works perfectly fine and all the goodies are so worth the switch. 🙂

                          1 Reply Last reply Reply Quote 0
                          • NeoDueundefined
                            NeoDue @GeneRisi
                            last edited by

                            @generisi I can confirm that it runs perfectly fine and fast as well.

                            I had the "Operation 3 failed" Wifi problem (https://forum.duet3d.com/topic/21562/firmware-bundle-3-2-2-released/) when upgrading from 3.2.0 to 3.2.2 though.

                            1 Reply Last reply Reply Quote 0
                            • RyanPundefined
                              RyanP
                              last edited by

                              2.05 on all machines. Too much on my plate. But one day I will simply do all machines.

                              CR10S, August 2018
                              Anycubic Photon S December 2019
                              Ender 5 Feb 2020
                              Ender 5 Plus May 2020
                              Anycubic Photon Mono X Nov 2020
                              ~
                              https://3dimensiongames.com/

                              1 Reply Last reply Reply Quote 0
                              • EducatingSavvasundefined
                                EducatingSavvas @Phaedrux
                                last edited by EducatingSavvas

                                @phaedrux I tried the latest beta version but found the addition of a P parameter to define a spindle tool in the M3 command problematic - so went back to 3.2. I got it working but suspect using/gearing up for multiple tools (tang knife, laser, plotting-pen and spindle) will be over complicated by this. Possibly having to to use separate post processors for each tool, instead of using the tool number in the tool database to determine the tool I am using.

                                dc42undefined 1 Reply Last reply Reply Quote 0
                                • dc42undefined
                                  dc42 administrators @EducatingSavvas
                                  last edited by

                                  @educatingsavvas said in What firmware version are you using?:

                                  I tried the latest beta version but found the addition of a P parameter to define a spindle tool in the M3 command problematic

                                  You only need the P parameter if you are in CNC mode and you want to control a spindle that is not the one used by the active tool.

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  EducatingSavvasundefined 1 Reply Last reply Reply Quote 0
                                  • EducatingSavvasundefined
                                    EducatingSavvas @dc42
                                    last edited by

                                    @dc42 Does that mean if R in M950 and P in M563 are the same number during CNC mode, I would not need to write P# when using an M3 command? Should any spindle defining commands be in the tfree#.g tpre#.g and tpost#.g? That is to say I load the spindle separately from config.g file?

                                    I think the confusion with CNC is that you have the spindle and the bits, or tangential knife and blades are referred and all are referred to as tools. And that on a CNC mills the tool database in often part of a complicated control system, while for flat-bed panel CNC machine the tool database in part of the CAM software.

                                    dc42undefined 1 Reply Last reply Reply Quote 0
                                    • dc42undefined
                                      dc42 administrators @EducatingSavvas
                                      last edited by

                                      @educatingsavvas said in What firmware version are you using?:

                                      Does that mean if R in M950 and P in M563 are the same number during CNC mode, I would not need to write P# when using an M3 command?

                                      Yes.

                                      Should any spindle defining commands be in the tfree#.g tpre#.g and tpost#.g? That is to say I load the spindle separately from config.g file?

                                      There is no need to do that. In config.g, define all your spindles, then for each tool specify which spindle it uses in its M563 command.

                                      Duet WiFi hardware designer and firmware engineer
                                      Please do not ask me for Duet support via PM or email, use the forum
                                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                                      EducatingSavvasundefined 1 Reply Last reply Reply Quote 1
                                      • EducatingSavvasundefined
                                        EducatingSavvas @dc42
                                        last edited by EducatingSavvas

                                        Not sure if this got noted @dc42 but I'm finding I still have to write the P# for the M3 command to work - I've start a separate post about this.

                                        1 Reply Last reply Reply Quote 0
                                        • manpowreundefined
                                          manpowre
                                          last edited by

                                          3.4 beta2 on my Flsun QQ-S pro with duet3d 2 wifi. upgraded today. I had 3.3 beta 2 before this. All working as it should.

                                          The reason I upgraded was the bugfix for loosing z0 position of bed when homing delta. And I want to try out the accelerometer part. just gotta get the accelerometer and hook it up next week.

                                          1 Reply Last reply Reply Quote 0
                                          • massimilianocontiundefined
                                            massimilianoconti
                                            last edited by

                                            3.4 beta 2 but has some problems I'm not happy

                                            fcwiltundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA