Duet 3 3HC CAD Model Request

kroybal

Also interested in CAD model, any luck?

Nuramori

This post is deleted!

T3P3Tony

I have added a link on the documentation page to the file hosted on github:

https://duet3d.dozuki.com/Wiki/Duet_3_Expansion_Hardware_Overview#Section_3D_Model

Phil Maddox

@T3P3Tony Sorry but the file wont open/ import in either F360 or Autodesk Inventor (2016)

DIY-O-Sphere

@Phil-Maddox

Right click "View raw"
Then perform" Save as"
It's a little bit tricky to download a single file on Github.....

Dizzwold

@DIY-O-Sphere
Any ideas on have to download it on a mac?

infiniteloop

@Dizzwold

Any ideas on have to download it on a mac?

As described above. Use the link provided by @T3P3Tony, follow the link "3HC STEP File on github", there, use the context menu with a right click as @DIY-O-Sphere illustrates with his screenshot. You then might be asked whether you want to permit downloads from GitHub. You then will find the file "Duet3_Exp_3HC.step.txt" in your "Downloads" folder where you need to remove the second extension (".txt") from the file name. Finally, you need an app which can handle the .step file …

Dizzwold

@infiniteloop

Thank you for confirming what I'd already tried.

It would seem my problem lies with Fusion from the following;
Screen Shot 2022-11-24 at 09.11.14.png

infiniteloop

@Dizzwold said in Duet 3 3HC CAD Model Request:

Thank you for confirming what I'd already tried.

Well, in the meantime, I tried further: removing the .txt file type seemed to work in Finder, but the extension reappeared after editing. Use the file info dialog for that.

I don't use Fusion but FreeCad - after I had really renamed the file, I could import it without problems:

Bildschirmfoto 2022-11-24 um 11.35.23.png