Duet 3 3HC CAD Model Request

[jay_s_uk]

Any chance of getting a 3D CAD model of the duet 3 3HC board?

[blt3dp]

It's on the Wiki

https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Hardware_Overview#Section_3D_Model

[jay_s_uk]

@blt3dp
3HC, not 6HC

[blt3dp]

@jay_s_uk

Oops, totally mixed that up.

[jay_s_uk]

@blt3dp don't worry

[kroybal]

Also interested in CAD model, any luck?

[Nuramori]

This post is deleted!

[T3P3Tony]

I have added a link on the documentation page to the file hosted on github:

https://duet3d.dozuki.com/Wiki/Duet_3_Expansion_Hardware_Overview#Section_3D_Model

[Phil Maddox]

@T3P3Tony Sorry but the file wont open/ import in either F360 or Autodesk Inventor (2016)

[DIY-O-Sphere]

@Phil-Maddox

Right click "View raw"
Then perform" Save as"
It's a little bit tricky to download a single file on Github.....

[Dizzwold]

@DIY-O-Sphere
Any ideas on have to download it on a mac?

[infiniteloop]

@Dizzwold

Any ideas on have to download it on a mac?

As described above. Use the link provided by @T3P3Tony, follow the link "3HC STEP File on github", there, use the context menu with a right click as @DIY-O-Sphere illustrates with his screenshot. You then might be asked whether you want to permit downloads from GitHub. You then will find the file "Duet3_Exp_3HC.step.txt" in your "Downloads" folder where you need to remove the second extension (".txt") from the file name. Finally, you need an app which can handle the .step file …

[Dizzwold]

@infiniteloop

Thank you for confirming what I'd already tried.

It would seem my problem lies with Fusion from the following;

[infiniteloop]

@Dizzwold said in Duet 3 3HC CAD Model Request:

Thank you for confirming what I'd already tried.

Well, in the meantime, I tried further: removing the .txt file type seemed to work in Finder, but the extension reappeared after editing. Use the file info dialog for that.

I don't use Fusion but FreeCad - after I had really renamed the file, I could import it without problems:

[Dizzwold]

@infiniteloop

The 6hc link comes up with 404 missing.

https://github.com/Duet3D/Duet3-Mainboard-6HC/tree/master/Duet3_Mainboard_v1.0

Are there any new links?

[Phaedrux]

@Dizzwold https://github.com/Duet3D/Duet3-Mainboard-6HC/tree/master/Duet3_Mainboard_6HC_v1.0

URL just changed to add 6HC

[Dizzwold]

@Phaedrux @infiniteloop @DIY-O-Sphere

Thank you guys, Got it now.