Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Z motor on expansion board not moving

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    4
    45
    1.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • wdenkerundefined
      wdenker @jay_s_uk
      last edited by

      @jay_s_uk G4 S2 is at the very first of the config.g M584 is called twice as we were having some issues and testing a theory. I can remove those no problem. Doesn't explain why it says driver 1.2 doesn't exist even though it is definitely there.

      www.bd3dcustoms.com | BD3DCUSTOMS Supercube

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @wdenker
        last edited by

        @wdenker G4 S2 isn't in the config you posted in the first post. In which case repost your config please ideally as code like your M122 outputs so I don't have to download it to look at it

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        wdenkerundefined 1 Reply Last reply Reply Quote 0
        • wdenkerundefined
          wdenker @jay_s_uk
          last edited by

          @jay_s_uk

          ; Configuration file for Duet 3 (firmware version 3)
          ; executed by the firmware on start-up
          ;
          ; generated by RepRapFirmware Configuration Tool v3.4.5 on Thu Jun 18 2020 20:04:02 GMT-0600 (Mountain Daylight Time)
          
          ; General preferences
          G4 S2
          G90                                                  ; send absolute coordinates...
          M83                                                  ; ...but relative extruder moves
          M550 P"Fabricator by IOFX"                               ; set printer name
          M669 K1                                              ; select CoreXY mode
          
          ; Network
          M552 P192.168.1.14 S1                                     ; enable network and acquire dynamic address via DHCP
          M586 P0 S1                                           ; enable HTTP
          M586 P1 S1                                           ; enable FTP
          M586 P2 S1                                           ; enable Telnet
          
          ; Drives
          M584 X0.1 Y0.2 Z0.3:0.4:0.5:1.2 E0.0                 ; set drive mapping
          M569 P0.0 S1                                         ; physical drive 0.0 goes backwards
          M569 P0.1 S0                                         ; physical drive 0.1 goes backwards
          M569 P0.2 S1                                         ; physical drive 0.2 goes backwards
          M569 P0.3 S1                                         ; physical drive 0.3 goes forwards
          M569 P0.4 S1                                         ; physical drive 0.3 goes forwards
          M569 P0.5 S1                                         ; physical drive 0.3 goes forwards
          M569 P1.0 S1                                         ; physical drive 1.0 goes backwards
          M569 P1.1 S1                                         ; physical drive 1.1 goes backwards
          M569 P1.2 S1                                        ; physical drive 1.2 goes backwards
          M584 X0.1 Y0.2 Z0.3:0.4:0.5:1.2 E0.0                 ; set drive mapping
          M915 P0.1:0.2 F0 S2
          M350 X16 Y16 Z8 E8 I1                              ; configure microstepping with interpolation
          M92 X160.00 Y160.00 Z160.00 E420.00                    ; set steps per mm
          M205 X20.00 Y20.00 Z3.00 E120.00                  ; set maximum instantaneous speed changes (mm/min)
          M203 X12000.00 Y12000.00 Z300.00 E6000.00              ; set maximum speeds (mm/min)
          M201 X2500.00 Y2500.00 Z100.00 E10000.00             ; set accelerations (mm/s^2)
          M906 X1600 Y1600 Z1800 E1600 I30                         ; set motor currents (mA) and motor idle factor in per cent
          M84 S30                                              ; Set idle timeout
          M584 X0.1 Y0.2 Z0.3:0.4:0.5:1.2 E0.0                 ; set drive mapping
          M671 X-125:-125:1125:1125 Y100:900:900:100 S7            ; leadscrews at left (connected to Z) and right (connected to E1) of X axis
          
          
          ; Axis Limits
          M208 X0 Y0 Z0 S1                                     ; set axis minima
          M208 X1000 Y1000 Z1100 S0                               ; set axis maxima
          
          ; Endstops
          M574 X1 S3 F0 R0                                          ; configure sensorless endstop for low end on X
          M574 Y1 S3 F0 R0                                          ; configure sensorless endstop for low end on Y
          M574 X1 Y1 S3                               ; Set endstops controlled by motor load detection
          M574 Z1 S2                                           ; configure Z-probe endstop for low end on Z
          M915 X Y S2 R0 F0 	                    ; set X and Y to sensitivity 7, do nothing when stall, unfiltered
          
          ; Z-Probe
          M950 S0 C"io7.out"                           ; create servo pin 0 for BLTouch
          M558 P9 C"^io7.in" H5 F120 T6000             ; set Z probe type to bltouch and the dive height + speeds
          G31 P500 X0 Y0 Z2.65                          ; set Z probe trigger value, offset and trigger height
          M557 X25:955 Y25:955 S150                             ; define mesh grid
          
          ; Heaters
          M308 S0 P"temp1" Y"thermistor" T100000 B4725          ; configure sensor 0 as thermistor on pin temp1
          M950 H0 C"out1" T0                                   ; create bed heater output on out1 and map it to sensor 0
          M307 H0 B1 S1.00                                     ; enable bang-bang mode for the bed heater and set PWM limit
          M140 H0                                              ; map heated bed to heater 0
          M143 H0 S120                                         ; set temperature limit for heater 0 to 120C
          M308 S1 P"temp2" Y"pt1000"                           ; configure sensor 1 as thermistor on pin temp0
          M950 H1 C"out2+out3" T1                                   ; create nozzle heater output on out0 and map it to sensor 1
          M307 H1 B0 S1.00                                     ; disable bang-bang mode for heater  and set PWM limit
          
          ; Fans
          M950 F0 C"out8" Q500                               ; create fan 0 on pin out6 and set its frequency
          M106 P0 S0 H-1 C"Part Cooling"                                       ; set fan 0 value. Thermostatic control is turned off
          M950 F1 C"out9" Q500                               ; create fan 0 on pin out6 and set its frequency
          M106 P1 S0 H-1 C"Part Cooling"                                       ; set fan 0 value. Thermostatic control is turned off
          M950 F2 C"out7" Q500                                ; create fan 1 on pin out7 and set its frequency
          M106 P2 S1 H1 T45                                    ; set fan 1 value. Thermostatic control is turned on
          M950 F5 C"1.out6" Q500                                 ; create fan 1 on pin out7 and set its frequency
          M106 P5 S1 H100 T15                                    ; set fan 1 value. Thermostatic control is turned on
          M950 F3 C"1.out7" Q500                                 ; create fan 1 on pin out7 and set its frequency
          M106 P3 S1 H100 T15                                    ; set fan 1 value. Thermostatic control is turned on
          M950 F4 C"1.out8" Q500                                 ; create fan 1 on pin out7 and set its frequency
          M106 P4 S1 H100 T15                                    ; set fan 1 value. Thermostatic control is turned on
          
          
          ; Tools
          M563 P0 D0 H1 F0:1                                     ; define tool 0
          G10 P0 X0 Y0 Z0                                      ; set tool 0 axis offsets
          G10 P0 R0 S0                                         ; set initial tool 0 active and standby temperatures to 0C
          
          ; Custom settings are not defined
          
          ; Miscellaneous
          M591 D0 P2 C"io1.out" S1 ; filament monitor connected to E0 endstop
          M911 S22 R23.5 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss
          M570 H1 P10 T15 S999
          M501; 
          
          
          

          www.bd3dcustoms.com | BD3DCUSTOMS Supercube

          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @wdenker
            last edited by

            @wdenker I guess it doesn't like the Z drivers being spread across the mainboard and CAN board. Best move all Z drivers on to one and move Z or Y onto the 3HC

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            wdenkerundefined 1 Reply Last reply Reply Quote 0
            • wdenkerundefined
              wdenker @jay_s_uk
              last edited by

              @jay_s_uk any ideas on the filament error I get literally every 30 seconds no matter no filament movement?

              www.bd3dcustoms.com | BD3DCUSTOMS Supercube

              wdenkerundefined 1 Reply Last reply Reply Quote 0
              • wdenkerundefined
                wdenker @wdenker
                last edited by

                @wdenker can't even get it to report 3 out of 4 times.

                12/20/2023, 4:25:15 PM	M591 D0
                12/20/2023, 4:25:12 PM	M591 D0
                Simple filament sensor on pin (io1.out,serial1.tx), enabled, output high when no filament, filament present: no
                12/20/2023, 4:25:00 PM	M591 D0
                12/20/2023, 4:24:59 PM	M591 D0
                12/20/2023, 4:24:41 PM	M591 D0
                

                www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                • jay_s_ukundefined
                  jay_s_uk @wdenker
                  last edited by

                  @wdenker it probably needs connecting to a .in rather than a .out

                  Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                  wdenkerundefined 1 Reply Last reply Reply Quote 0
                  • wdenkerundefined
                    wdenker @jay_s_uk
                    last edited by

                    @jay_s_uk we've tried both in and out.

                    www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                    jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                    • jay_s_ukundefined
                      jay_s_uk @wdenker
                      last edited by

                      @wdenker can you confirm your wiring, ideally with pictures , and what type of filament sensor it is?

                      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                      wdenkerundefined 2 Replies Last reply Reply Quote 0
                      • wdenkerundefined
                        wdenker @jay_s_uk
                        last edited by

                        @jay_s_uk ah you were right. We had to switch it to 5v vs 3.3 and didn't have it on in after we swapped to the 5v. So all of my issues are resolved at this point.

                        www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                        wdenkerundefined 1 Reply Last reply Reply Quote 1
                        • wdenkerundefined
                          wdenker @wdenker
                          last edited by

                          @wdenker Well I got ahead of myself still getting the error just not as often.

                          www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                          1 Reply Last reply Reply Quote 0
                          • wdenkerundefined
                            wdenker @jay_s_uk
                            last edited by

                            @jay_s_uk Here are the pics. I have also updated config to reflect going to io2.in vs out PXL_20231220_234947688.jpg PXL_20231220_234959902.jpg

                            www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                            wdenkerundefined 1 Reply Last reply Reply Quote 0
                            • wdenkerundefined
                              wdenker @wdenker
                              last edited by

                              @Phaedrux any ideas?

                              www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                              droftartsundefined jay_s_ukundefined 2 Replies Last reply Reply Quote 0
                              • droftartsundefined
                                droftarts administrators @wdenker
                                last edited by

                                @wdenker on Duet 3 boards, io.out pins can be used as inputs, but have no series resistor to offer voltage protection, so are only 3.3V tolerant. It is possible you have damaged the 3HC connecting a 5V endstop to an io.out pin.

                                Have you tried a different filament sensor? It is quite possible that the microswitch or wiring is faulty, or could be picking up interference from motor or heater wiring.

                                Ian

                                Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                wdenkerundefined 1 Reply Last reply Reply Quote 0
                                • jay_s_ukundefined
                                  jay_s_uk @wdenker
                                  last edited by

                                  @wdenker are you powering the 5v_ext? have you tried using it with 3.3v as according to the trianglelab docs it also works with that

                                  Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                  wdenkerundefined 1 Reply Last reply Reply Quote 0
                                  • wdenkerundefined
                                    wdenker @jay_s_uk
                                    last edited by

                                    @jay_s_uk we have tried the 3.3 on the duet and it does not work so we figured we have to use the 5 volt.

                                    www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                                    jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                    • jay_s_ukundefined
                                      jay_s_uk @wdenker
                                      last edited by

                                      @wdenker if it doesn't work with 3.3v, which the manufacturer indicates it should, then i guess theres an issue with it

                                      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                      wdenkerundefined 2 Replies Last reply Reply Quote 0
                                      • wdenkerundefined
                                        wdenker @droftarts
                                        last edited by

                                        @droftarts I would think that I would have only damaged that one port if that was the case. I have tried multiple ports to validate that.

                                        www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                                        1 Reply Last reply Reply Quote 0
                                        • wdenkerundefined
                                          wdenker @jay_s_uk
                                          last edited by

                                          @jay_s_uk no none of them work with the 3.3 manufacturer claims they are 3.5 from everything I've seen and I have five working ones that I tried on the 3.3 and moved over to the duex 5 And they all work with the 5 volt.

                                          www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                                          1 Reply Last reply Reply Quote 0
                                          • wdenkerundefined
                                            wdenker @jay_s_uk
                                            last edited by

                                            @jay_s_uk The other thing I am curious about is if the sensor number out of range error in the M98 p"config.g" if that may be somehow causing it but it doesn't give any reference to what is out of range and there are 3.

                                            www.bd3dcustoms.com | BD3DCUSTOMS Supercube

                                            jay_s_ukundefined wdenkerundefined 2 Replies Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA