Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet3D announces new tool board at FormNext

    Scheduled Pinned Locked Moved
    General Discussion
    25
    107
    8.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Surgikillundefined
      Surgikill @Exerqtor
      last edited by

      @Exerqtor I'm still waiting on more tests. My money is on the stealthchop issue. Apparently around 300rpm is where the problem arises. I'll do some quick math to see if that is around the 8mm/s where he was experiencing drop off.

      Surgikillundefined 1 Reply Last reply Reply Quote 2
      • Notepadundefined
        Notepad @dc42
        last edited by

        @dc42 I cant say for certain as I have only tested the preproduction version. But I definitely didn't get the same values as Tom

        The real bamboo printer manufacturer

        1 Reply Last reply Reply Quote 0
        • Surgikillundefined
          Surgikill @Surgikill
          last edited by

          @Surgikill said in Duet3D announces new tool board at FormNext:

          @Exerqtor I'm still waiting on more tests. My money is on the stealthchop issue. Apparently around 300rpm is where the problem arises. I'll do some quick math to see if that is around the 8mm/s where he was experiencing drop off.

          At 300rpm on the motor, the hobbed gear would need to be around 18mm in order to achieve 8mm/s. At 10mm/s it would need to be around 23mm. I'm not sure on the actual size, but I would bet all my money it's less than 18mm, so that motor was going well in excess of 300rpm. Definitely needs more testing.

          1 Reply Last reply Reply Quote 0
          • jchodakowskiundefined
            jchodakowski
            last edited by

            Is there any access to the printed mount parts for the Z sensor? I've seen the spacer for the tb but nothing else.

            1 Reply Last reply Reply Quote 0
            • jltxundefined
              jltx
              last edited by

              Does the roto toolboard come with scanning z probe coils? I don’t see where to get those separately.

              elmoretundefined 1 Reply Last reply Reply Quote 0
              • elmoretundefined
                elmoret @jltx
                last edited by

                @jltx Yes

                1 Reply Last reply Reply Quote 0
                • Edkirkundefined
                  Edkirk
                  last edited by

                  I have ordered the new tool board to install on my Voron Trident with Micro Swiss NG Extruder, E3D hotend using Duet IR Probe for Z probe. I see in the Duet 3 Roto Toolboard documentation under Firmware notes "Compatible RepRapFirmware version 3.5 or later". I updated my 6HC with SBC which only goes up to 3.4.6, is there going to be any problems using 3.4.6 or do I have to wait for 3.5?

                  I plan on using a Voron Tap Z-Probe with optical sensor (not Duet IR probe I am currently using) then when I have everything working converting the Tap optical to Piezo from Precision Piezo to work like the Delta Smart Effector so the Tap probe will be a true tap probe like the Delta Smart Effector. Does this configuration look like it will work? Thanks, Ed

                  jay_s_ukundefined dc42undefined 2 Replies Last reply Reply Quote 0
                  • jay_s_ukundefined
                    jay_s_uk @Edkirk
                    last edited by

                    @Edkirk you need to use 3.5. It won't work correctly with 3.4.6

                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                    1 Reply Last reply Reply Quote 0
                    • dc42undefined
                      dc42 administrators @Edkirk
                      last edited by

                      @Edkirk you can install 3.5.0-rc.2 if you switch your package feed on the SBC from the stable to the unstable feed.

                      Duet WiFi hardware designer and firmware engineer
                      Please do not ask me for Duet support via PM or email, use the forum
                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                      Edkirkundefined 1 Reply Last reply Reply Quote 0
                      • Edkirkundefined
                        Edkirk @dc42
                        last edited by

                        @dc42 Where do I find package feed?

                        Exerqtorundefined Edkirkundefined 3 Replies Last reply Reply Quote 0
                        • Exerqtorundefined
                          Exerqtor @Edkirk
                          last edited by

                          @Edkirk said in Duet3D announces new tool board at FormNext:

                          @dc42 Where do I find package feed?

                          Check this out 😊

                          1 Reply Last reply Reply Quote 0
                          • Edkirkundefined
                            Edkirk @Edkirk
                            last edited by Edkirk

                            This post is deleted!
                            1 Reply Last reply Reply Quote 0
                            • Edkirkundefined
                              Edkirk @Edkirk
                              last edited by

                              This post is deleted!
                              Edkirkundefined 1 Reply Last reply Reply Quote 0
                              • Edkirkundefined
                                Edkirk @Edkirk
                                last edited by

                                This post is deleted!
                                Edkirkundefined 1 Reply Last reply Reply Quote 0
                                • Edkirkundefined
                                  Edkirk @Edkirk
                                  last edited by

                                  This post is deleted!
                                  1 Reply Last reply Reply Quote 0
                                  • Edkirkundefined
                                    Edkirk
                                    last edited by

                                    New Duet3D tool board up and running on Voron Trident, with Tap on Z axis for homing and bed leveling. Micro Swiss NG extruder, E3d heater and nozzle.20240109_053911.jpg

                                    1 Reply Last reply Reply Quote 2
                                    • Edkirkundefined
                                      Edkirk
                                      last edited by

                                      Are there plans for a Delta Smart Effector with built-in Tool Board, I would install on my Delta?

                                      demonio669undefined 1 Reply Last reply Reply Quote 0
                                      • demonio669undefined
                                        demonio669 @Edkirk
                                        last edited by

                                        @Edkirk +1 I also want this board!!

                                        dc42undefined 1 Reply Last reply Reply Quote 0
                                        • dc42undefined
                                          dc42 administrators @demonio669
                                          last edited by

                                          @demonio669 @Edkirk please see https://forum.duet3d.com/topic/34657/combined-smart-effector-and-tool-board-for-delta-printers.

                                          Duet WiFi hardware designer and firmware engineer
                                          Please do not ask me for Duet support via PM or email, use the forum
                                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                                          1 Reply Last reply Reply Quote 0
                                          • jltxundefined
                                            jltx
                                            last edited by

                                            Does the tool board come with uncrimped pins or do I need to source those myself? e3d told me the leads on the Roto extruder are 1m long so I would need to remove 90% of the wire and reposition the connectors to use this tool board mounted locally.

                                            T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA