Eddy current probe (duet SZP, Cartographer, Beacon)
-
I have had miserable luck with the duet 3 scanning probe. I just purchased a can adapter board from Amazon that is engineered so much better. Surface mount components but through hole tech for USB-C and Can cables. I ran the 5VDC line from the Cartographer 3d v3 to the same 5VDC as the USB and connect the ground can L and Can H to the screw terminals on the adapter board. Then I connected the green (CanH) and white (CanL) to the 1LC and the 5VDC and ground to the 5VDC plug used for the SZP. The blue light on the cartographer is blue when proximity to the bed is close and off when moved away from the bed. I have to enter the codes in the Config, but it appears to be working.
-
@Polyneutron21 i'm not sure what board you are talking about.
beacon and cartographer don't support RRF and neither does the eddy probe
