Cura Script to Automatically Probe Only Printed Area

tcj

@Baenwort said in Cura Script to Automatically Probe Only Printed Area:

Does this bring it closer to working for Delta's? Or at least probing a square area of the circular bed?

Yes, this makes it usable for delta's, because
"For Cartesian printers, specify minimum and maximum X and Y values to probe and the probing interval. For Delta printers, specify the probing radius. If you define both, the probing area will be the intersection of the rectangular area and the circle. "
https://duet3d.dozuki.com/Wiki/Gcode#Section_M557_Set_Z_probe_point_or_define_probing_grid

zapta

@Red-Sand-Robot, the change that you made in the program, changing the default meshable area to -100:100 is correct. Just remember to apply it again if you will download a newer version of this script.

I run your gcode file and got this which looks ok to me

MESHABLE area: -100.0:100.0,-100.0:100.0
Opening gcode file: flex.gcode
Read 33099 lines
Parsing state = ParsingState.WAITING_FOR_LAYER1
; Automesh: begin layer 0
Parsing state = ParsingState.IN_LAYER1
; Automesh: begin layer 1
Parsing state = ParsingState.LAYER1_DONE
First layer print areas: -13:13,-48:48
printArea: -13:13,-48:48
Will use 3 x 4 mesh points
Marker: M557 X-23:23 Y-58:58 P3:4
Inserted: M557 X-23:23 Y-58:58 P3:4

Does it work for you now or are there still problems?

Edit: for your question the -- flags should be specified immediately after the .py script name.

Baenwort

@tcj Great! I'll give it a try on my next print.

Do you think it will use the Delta probe interval for the new area or one specified by the gcode?

Baenwort

@tcj So I'm still learning Cura after switching from using MatterControl since I got my Rostock v3. I tried adding the duet3d_automesh.py from zapta's github to the scripts area of the postprocessing folder of Cura's plugin folder.

I do have Python 3 installed (3.8.3 to be exact) but this seems to make no difference to it showing up in Cura.

zapta

@Baenwort, can you provide a little bit more info. E.g. what computer you are using (windows? mac? linux?) and how you set up the script in cura.

Baenwort

@zapta

Window's but I also tried it with a Ubuntu 20.04 Cura install. Both are Cura 4.6 and the OP and most post processing scripts direct placing the .py file in the plugin post processing directory.

I can get you the exact tree when I get.back to my home tonight.

sandoz

I have installed this into Cura 4.62 and using on my Railcore II. When it goes to run it always defines my X end point as being 1800.

M557 X103.850:1800.000 Y115.304:164.705 S10.000 ; Leveling mesh defined by LevelingMeshOptimizer

Railcore of course doesn't like this and then just skips the mesh:

Error: M557: bad grid definition: Too many grid points; suggest increase spacing to 44.2mm
Error: G29: No valid grid defined for bed probing

Is there something I am doing wrong?

zapta

@sandoz said in Cura Script to Automatically Probe Only Printed Area:

Is there something I am doing wrong?

My guess is that there is a X1800 somewhere in the gcode that is picked by the script. Can you post the gcode file?

sandoz

@zapta Alright.. using your comments as a place to start I found that having my Jerk control turned on in Cura led to some M566 x1800 commands that it was picking up. I turned off Curas control and just set it in the machine settings and now it slices properly.

zapta

@sandoz, the code is dump, looking for X<number> in the text regardless of the command, may even look in comments, I am not sure. If needed, it can be restricted it to a set of commands such as G0, G1, etc.

MartinNYHC

I wanted to set the probe spacing according to the size of the model. If it's <= 100 spacing should be 20, if it's >100 spacing should be 50.

Need to find the proper size/spacing values, but if anyone is interested, here's the diff:

128,135d127
<     sizeX = int(bounds['X']['max'] - bounds['X']['min'])
<     sizeY = int(bounds['Y']['max'] - bounds['Y']['min'])
<
<     if sizeX >= 100 or sizeY >= 100:
<         bounds['S'] = 50
<     else:
<         bounds['S'] = 20
<
137c129
<     gridNew = 'M557 X%d:%d Y%d:%d S%d' % (
---
>     gridNew = 'M557 X%d:%d Y%d:%d' % (
140d131
<         bounds['S'],
147c138
<             linesNew.append(re.sub(r'^M557 X\d+:\d+ Y\d+:\d+ S\d+', gridNew, line, flags=re.MULTILINE))
---
>             linesNew.append(re.sub(r'^M557 X\d+:\d+ Y\d+:\d+', gridNew, line, flags=re.MULTILINE))

nick9one1

I'm trying to get this working in superslicer but get an error. Can anyone help?

in post-processing script

C:\Users\mumby\.windows-build-tools\python27\python.exe "C:\Program Files\SuperSlicer\meshgrid.py"

my start gcode (added M557)

M557 X20:292 Y15:300 P5                      	; define mesh grid
M104 S[first_layer_temperature]                   ; set extruder temp
M140 S[first_layer_bed_temperature]           ; set bed temp
G21			                   ; metric values
M190 S[first_layer_bed_temperature]           ; wait for bed temp
G28			                   ; home all
G32			                   ; Run mesh grid compenstion
G92 E0 F100			; reset extruder
G1 Z10 F3000 			; move z up little to prevent scratching of surface
M109 S[first_layer_temperature]                    ; wait for extruder temp
M98 P"0:/macros/Filament/Clean Nozzle"	; Clean nozzle macro
M98 P/macros/Filament/Purge		; Run nozzle purge macro
G1 E-3 F2000		                  ; Retract 3mm filament
G92 E0 		                                     ; reset extruder

this script itself (coped from an earlier post here)

#!/usr/bin/env python3
"""Simplify3D post-processing script for RepRap firmware printers which dynamically defines the mesh grid dimensions (M557) based on the print dimensions. 
{1}
Usage:
{1}
    Within Simplify3D > Process Settings > Scripts > Post Processing > add the following command:
        python3 <script_location>/meshgrid.py "[output_filepath]"
    
    Starting script must contain M557 Command (ie M557 X30:300 Y30:300 P20).
{1}
Args:
{1}
    Path: Complete path to the gcode file created by Simplify 3d.
{1}
Requirements:
{1}
    Tested using Python 3.8.1.
{1}
Credit:
{1}
    Adapted from code originally posted by CCS86 on https://forum.duet3d.com/topic/15302/cura-script-to-automatically-probe-only-printed-area?_=1587348242875.
{1}
"""
import sys
import re
import math
 
def main(filename):
    
    try:
        _s3dFile = open(filename, encoding='utf-8')
 
    except TypeError:
        try:
            _s3dFile = open(filename)
            
        except:
            print("Open file exception. Exiting meshgrid.py.")
            sys.exit()
    
    except FileNotFoundError:
        print('File not found. Exiting meshgrid.py.')
        sys.exit()
    
    lines = _s3dFile.readlines()
    _s3dFile.close()
 
    linesNew = calcBed(lines)
 
    _s3dFileNew = open(filename, "r+")
    _s3dFileNew.seek(0)                       
    _s3dFileNew.truncate()
    for element in linesNew:
        _s3dFileNew.write(element)
    _s3dFileNew.close()
 
    return
 
 
def calcBed(lines):
 
    bounds = findBounds(lines)
    bed = findBed(lines)
 
    for axis in bounds:
        if bounds[axis]['max'] - bounds[axis]['min'] < bed[axis]:
            print(f'Success: {axis} mesh is smaller than bed')
            
        else:
            print('Error: Mesh is larger than bed. Exiting meshgrid.py.')
            sys.exit()
 
        for limit in bounds[axis]:
            if limit == 'min':
                if (bed[axis] / 2) - bounds[axis][limit] > 0: 
                    print (f'Success: {axis} {limit} coordinate is on the bed.')
                else:
                    print (f'Error: {axis} {limit} coordinate is off the bed. Exiting meshgrid.py.')
                    sys.exit()
 
            if limit == 'max':
                if (bed[axis]) - bounds[axis][limit] > 0: 
                    print (f'Success: {axis} {limit} coordinate is on the bed.')
                else:
                    print (f'Error: {axis} {limit} coordinate is off the bed. Exiting meshgrid.py.')
                    sys.exit()
 
    return fillGrid(bounds, lines)
 
    
def findBed(lines):
    bed = {
        'X': 0,
        'Y': 0,
        }
 
    for line in lines:
        if line.startswith(';   strokeXoverride,'):
            bed['X'] = int(re.search(r'\d.+\S', line).group())
        elif line.startswith(';   strokeYoverride,'):
            bed['Y'] = int(re.search(r'\d.+', line).group())
            break
            
    return bed
 
 
def findBounds(lines):
    bounds = {
        'X': {'min': 9999, 'max': 0},
        'Y': {'min': 9999, 'max': 0},
        }
    parsing = False
    for line in lines:
        if line.startswith('; layer 1,'):
            parsing = True
            continue
        elif line.startswith('; layer 2,'):
            break
 
        if parsing:
            # Get coordinates on this line
            for match in re.findall(r'([YX])([\d.]+)\s', line):
                # Get axis letter
                axis = match[0]
 
                # Skip axes we don't care about
                if axis not in bounds:
                    continue
 
                # Parse parameter value
                value = float(match[1])
 
                # Update bounds
                bounds[axis]['min'] = math.floor(min(bounds[axis]['min'], value))
                bounds[axis]['max'] = math.ceil(max(bounds[axis]['max'], value))
 
    return bounds
 
 
def fillGrid(bounds, lines):
    # Fill in the level command template
    gridNew = 'M557 X%d:%d Y%d:%d' % (
        bounds['X']['min'], bounds['X']['max'],
        bounds['Y']['min'], bounds['Y']['max'],
    )
 
    # Replace M557 command in GCODE
    linesNew = []
    for line in lines:
        if line.startswith('M557'):
            linesNew.append(re.sub(r'^M557 X\d+:\d+ Y\d+:\d+', gridNew, line, flags=re.MULTILINE))
        else:
            linesNew.append(line)
    return linesNew
 
 
if __name__ == '__main__':
    if sys.argv[1]:
        main(filename = sys.argv[1])
    else:
        print('Error: Proper s3d post processing command is python3 <script_location>/meshgrid.py "[output_filepath]". Exiting meshgrid.py.')
        sys.exit()

PCR

@nick9one1 See this

https://forum.duet3d.com/topic/25882/only-probe-bed-where-it-is-printed-solution-with-prusaslicer/3

nick9one1

@pcr

Thanks! I actually got this working, and its been great since I posted. But will take a look at your solution