Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 Mini 5+ for a Voron V2.4?

    Scheduled Pinned Locked Moved
    General Discussion
    9
    25
    2.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • zaptaundefined
      zapta @Phaedrux
      last edited by

      @phaedrux said in Duet 3 Mini 5+ for a Voron V2.4?:

      Perhaps he meant that if you didn't go with a toolboard 1.1 you'd need to add more wires for the accelerometer as well to get the input shaping.

      Thanks @Phaedrux. Is it reasonable to mount the accelerometer temporarily for calibration or is a strong argument for having the accelerometer mounted all the time?

      Phaedruxundefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator @zapta
        last edited by

        @zapta said in Duet 3 Mini 5+ for a Voron V2.4?:

        Is it reasonable to mount the accelerometer temporarily for calibration or is a strong argument for having the accelerometer mounted all the time?

        My understanding is that it's only required for the initial measurements, so could be removed. But that's not to say there won't be some future benefit to having real time accelerometer data.

        Z-Bot CoreXY Build | Thingiverse Profile

        zaptaundefined 1 Reply Last reply Reply Quote 0
        • zaptaundefined
          zapta @Phaedrux
          last edited by

          @phaedrux, thanks.

          1 Reply Last reply Reply Quote 0
          • 3DPMicroundefined
            3DPMicro
            last edited by

            I like the 50w heaters personally. Super fast heat up times. I used to kill one about every 100hrs at 350-380c until I spent a few extra bucks and got one from Slice. If your printing 250 and below the Slice or amazon/Ebay sourced versions will probably last forever.

            Duet controlled Jet Lathe, scratch built micro mill and 3d printer. 1992 Haas VF2 VMC retrofit

            zaptaundefined 1 Reply Last reply Reply Quote 0
            • zaptaundefined
              zapta @3DPMicro
              last edited by

              @3dpmicro, last time I run PID tuning I got a warning message about a very high max temperature which cause me to be more humble when selecting heater wattage 😉

              In my current printer I have a 40W 'only nozzle heater and it still heats faster than the bed.

              BTW, I place an order for a Mini5+ and a dual drivers module, so will see how it will go. I am quiet excited about having only a small Wifi board in the Voron, dropping the SBC and the auxiliary 5V power supply. Need to see where to fit that external antenna. Keeping the clean box shape of the frame makes it easier to place it in any orientation while working on it.

              3DPMicroundefined 1 Reply Last reply Reply Quote 0
              • 3DPMicroundefined
                3DPMicro @zapta
                last edited by

                @zapta said in Duet 3 Mini 5+ for a Voron V2.4?:

                @3dpmicro, last time I run PID tuning I got a warning message about a very high max temperature which cause me to be more humble when selecting heater wattage 😉

                In my current printer I have a 40W 'only nozzle heater and it still heats faster than the bed.

                Cant argue with the desire to be safe

                Duet controlled Jet Lathe, scratch built micro mill and 3d printer. 1992 Haas VF2 VMC retrofit

                1 Reply Last reply Reply Quote 0
                • Th0mpyundefined
                  Th0mpy @DIY-O-Sphere
                  last edited by

                  @diy-o-sphere Do you have the files for that back-side mount that you'd be willing to share? I'm getting ready to build my Voron 2.4 and I'm adding as many bells and whistles as I can 🙂

                  Usually the team that scores the most points wins the game.

                  DIY-O-Sphereundefined 1 Reply Last reply Reply Quote 0
                  • DIY-O-Sphereundefined
                    DIY-O-Sphere @Th0mpy
                    last edited by

                    @th0mpy

                    At the moment, my friend is still struggling with the connection of the energy chain. He is currently adjusting the position and size of the chain so as not to lose any space in the x-direction. As soon as this works he will share them.

                    (UTC+1)

                    zaptaundefined 1 Reply Last reply Reply Quote 0
                    • zaptaundefined
                      zapta @DIY-O-Sphere
                      last edited by

                      Any issue with the Tool Board electronics operating in the enclosed and hotter than usual Voron V2.4 chamber?

                      Dudek23undefined 1 Reply Last reply Reply Quote 0
                      • Dudek23undefined
                        Dudek23 @zapta
                        last edited by

                        @zapta At 60 degrees in the chamber, it works for me without any problems

                        1 Reply Last reply Reply Quote 0
                        • pixelpieperundefined
                          pixelpieper @zapta
                          last edited by

                          @zapta This is my solution with the Galileo variant of the clockwork extruder
                          IMG_8883.jpg IMG_8882.jpg

                          Voron V2.434 / Duet 3 Mini5+, Duet 3 Expansion Mini 2+, Duet 1LC V1.1 Toolboard
                          Voron V0.250 / Duet 2 Maestro

                          jumpedwithbothfeetundefined 1 Reply Last reply Reply Quote 0
                          • zaptaundefined
                            zapta @dc42
                            last edited by

                            My Voron V2.4 is working now with a Mini5+2 WiFi, RRF, no SBC and the Mini5 seems to be a very good fit. Coming from Duet2, it has nice touches such as 30 tolerance (for an Omron probe), external antenna, 12V DC/DC for fans, Neo Pixels outputs, small footprint for 7 drivers configuration, and more.

                            My only complains is the add on +2 drivers board hanging below the main board with. I would prefer to have a single board with 7 drivers.

                            1 Reply Last reply Reply Quote 0
                            • jumpedwithbothfeetundefined
                              jumpedwithbothfeet @pixelpieper
                              last edited by jumpedwithbothfeet

                              @pixelpieper or anybody else, is there anywhere I can download these files for the 1.1v mount?

                              #edit. Found semi-hidden in Github! https://github.com/christophmuellerorg/VoronUsers/tree/afterburner_1LC/printer_mods/christophmueller/Voron2-Gallileo-Afterburner-Duet-1LC

                              Thanks Jim

                              6HC Voron Trident based, 6XD CNC, Mini 5 polar printer

                              1 Reply Last reply Reply Quote 0
                              • zaptaundefined
                                zapta @dc42
                                last edited by

                                After using a Voron 2.4 with a stand alone Duet Mini5+2, I am in the opinion that's an excellent fit. Just saying.

                                dc42undefined 1 Reply Last reply Reply Quote 1
                                • dc42undefined
                                  dc42 administrators @zapta
                                  last edited by

                                  @zapta thanks for confirming this!

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • First post
                                    Last post
                                  Unless otherwise noted, all forum content is licensed under CC-BY-SA