Topics created by quinn

Have you used the erase jumper or button on the Duet to clear the firmware yet?

If you already have a working firmware on the board you don't need to erase it like that.

Please try following these procedures #1 and if that doesn't work, proceed to #2.

https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_firmware#fallback-procedure-1

@quinn Is this the same printer as in your post here? https://forum.duet3d.com/topic/28206/bltouch-not-working-duet-2-wifi?_=1650490637092

If so, let's try and keep it to one post to give it a concentrated effort.

@quinn said in BLTouch Not working Duet 2 WIfi:

I can't seem to get past this error how can I fix this?

What error do you mean? Your image seems to show it's connected to the wifi correctly and I don't see any other errors.

@quinn said in BLTouch Not working Duet 2 WIfi:

I found my first cable did not have a proper connection so I got a new cable now it works but is requesting a restart every time I try getting it to connect.

Are you able to connect to DWC now or not? Can you show a photo of what you're seeing now?

@quinn said in BLTouch Not working Duet 2 WIfi:

I want to update to riprap 3.3 but I cant seem to get it to work.

I need more details about what is and is not working right now first. If you have access to DWC updating the firmware is pretty straightforward and involves uploading a few zip files to the system tab.

If you still have access to DWC. Upload these 4 zip files, one at a time in the system tab. Don't extract them first. Reboot after each. Use M115 in the gcode console to verify the firmware has been applied.
https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.4.0/Duet2and3Firmware-3.4.0.zip
That will get your firmware and DWC up to date.

@quinn post your config.g and homing files so we can see what the printer is trying to so.

It's best if you post them as text using the code snippet tool (looks like </> and is two along from the bullet point button at the top when posting)