@PCR said in G30 Question / Feature Request:
Running 3.2 stable.
if i type
G30 X100 Y100 P0 Z-9999
it will probe at the 100/100 with the probe offset in mind
But if it want to home my machine with a G30
G30 X100 Y100
does not probe at at 100/100. It probes at the current location. I suppose thats normal?
So before i home my machine i have to Go to G1 X130 Y100 when my prob offset is -30.
Best
OK back to your question.
It has been suggested more than once that a G30 with no P parameter respect the X and Y parameters so the probe gets moved to the correct XY position, taking into account the probe X and Y offsets.
You can add your voice to this suggesting in the category for firmware updates.
As it stands you have to use a normal G1 command with X and Y adjusted according to the probe offsets.
You can compute the values for X and Y yourself or you can use the conditional code feature of v3 firmware to do it for you - if you wish.
Frederick