Feature Request - workpiece angle compensation CNC

CanDo415

Phaedrux

@CanDo415 Please update to 3.5.1 and double check your macro that it matches the one shared. Particularly the line number the error reports.

CanDo415

@Phaedrux
copied the macro.
I have to fix all problems from the update first. Messed up my whole config

CanDo415

"Error: in file macro line 37 column 12: meta command: unknown variable 'var'"
is the new result after updating to 3.5.1

var y_first_measurement = 0
var y_second_measurement = 0
var y_length = 0
var x_first_measurement = 0
var x_second_measurement = 0
var x_length = 0
var y_over_x = 0
var y_x_tan_rads = 0
var y_x_tan_deg = 0
 
M291 P"Probe links vor das Werstück positionieren" S2 X1 Y1 Z1					; Pop up box asking for operator input
M558 F1500																		; Set the initial probing speed
G38.2 Y600 P0 K0																	; Probe the material as a first pass
G1 Y{move.axes[1].machinePosition-5}											; Move 5mm away from the material
M558 F150																		; Set the final probing speed
G38.2 Y600 P0 K0																	; Probe the material again
M400																			; Make sure all movement is complete
set var.y_first_measurement=move.axes[1].machinePosition						; Record the stop position y_first_measurement
set var.x_first_measurement=move.axes[0].machinePosition						; Record the stop position x_first_measurement
M400																			; Make sure all data recording is complete
G1 Y{move.axes[1].machinePosition-10}											; Move 5mm away from the material
G1 X{move.axes[0].machinePosition+50}											; Move along the workpiece in X
M558 F1500																		; Set the initial probing speed
G38.2 Y600 P0 K0																	; Probe the material as a first pass
G1 Y{move.axes[1].machinePosition-5}											; Move 5mm away from the material
M558 F150																		; Set the final probing speed
G38.2 Y600 P0 K0																	; Probe the material again
M400																			; Make sure all movement is complete
set var.y_second_measurement=move.axes[1].machinePosition						; Record the stop position y_second_measurement
set var.x_second_measurement=move.axes[0].machinePosition						; Record the stop position x_second_measurement
M400																			; Make sure all data recording is complete
set var.y_length={var.y_second_measurement-var.y_first_measurement}
set var.x_length={var.x_second_measurement-var.x_first_measurement}
set var.y_over_x={var.y_length/var.x_length}
set var.y_x_tan_rads=atan(var.y_over_x)
set var.var y_x_tan_rads=degrees{var.y_x_tan_rads}
G68 A0 B0 R{var.y_x_tan_rads}

jay_s_uk

@CanDo415 i have a mistake in my macro. i have corrected my original

CanDo415

@jay_s_uk
@Phaedrux
Error: line 37 column 22: meta command: unknown value 'degrees'
there seems to be a bit more

jay_s_uk

@CanDo415 i've made another change but I don't think its going to fix the issue.
I don't know why "degrees" throws an error though as its a built in command

CanDo415

that's why i added Phaedrux.

I want to change it a bit to get the corner as well. so the degrees issue has to be solved anyway.
Thanks for the great start jay

CanDo415

@dc42
maybe he can help?

droftarts

@CanDo415 @jay_s_uk

set var.var y_x_tan_rads=degrees{var.y_x_tan_rads}

There's a space in the variable name, ie var.var y_x_tan_rads isn't a valid variable name.

Ian

CanDo415

@droftarts
jay corrected it already.
the problem shifted to the degrees command

OwenD

@jay_s_uk said in Feature Request - workpiece angle compensation CNC:

@CanDo415 i've made another change but I don't think its going to fix the issue.
I don't know why "degrees" throws an error though as its a built in command

degrees() is a function

You've used curly braces instead of parentheses

set var.y_x_tan_deg=degrees{var.y_x_tan_rads}

try

set var.y_x_tan_deg=degrees(var.y_x_tan_rads)

jay_s_uk

@OwenD i knew it would be something about the way its been formatted
updated the original again

CanDo415

@OwenD
thank you for showing up the problem

CanDo415

G68 A0 B0 R{-var.y_x_tan_rads}
the "-" seems important. otherwise the system gets turned the wrong way round

CanDo415

@jay_s_uk
i modified it quite a bit. some points are still not ready.
I'm not shure how to ent the if passage.
end if seems not to work

var y_1 = 0
var x_1 = 0
var x_2 = 0
var x_3 = 0
var x_4 = 0
var x_5 = 0
var delta_x = 0
var y_2 = 0
var y_3 = 0
var y_4 = 0
var y_5 = 0
var delta_y = 0
var z0 = 0
var d_probe = 0
var m_1 = 0
var m_2 = 0
var m_1_tan_rads = 0
var m_1_tan_deg = 0
 
M291 P"position probe over front left corner of workpiece" S2 X1 Y1 Z1	; Pop up box asking for operator input
M558 F300																		; Set the initial probing speed
G38.2 Z-60 P0 K0																; Probe the material as a first pass
M558 F50																		; Set the final probing speed
G38.4 Z50 P0 K0	                                                                                                                                ; Move away from workpiece in Z
M400																			        ; Make sure all movement is complete
set var.z0=move.axes[2].machinePosition	                			    		                ; Record the stop position y_first_measurement
M400																			        ; Make sure all data recording is complete

G1 Z{move.axes[2].machinePosition+5}										; Move along the workpiece in X
G1 X{move.axes[0].machinePosition-20}										; Move 5mm away from the material
G1 Y{move.axes[1].machinePosition+5}										; Move 5mm away from the material
G1 Z{move.axes[2].machinePosition-3}											; Move along the workpiece in X

M558 F1000																		; Set the initial probing speed
G38.2 X100 P0 K0																; Probe the material as a first pass
M558 F50																		; Set the final probing speed
G38.4 X-10 P0 K0	                                                                                                                        ; Move away from workpiece in X
M400																			        ; Make sure all movement is complete
set var.y_1=move.axes[1].machinePosition							    		        ; Record the stop position y_first_measurement
set var.x_1=move.axes[0].machinePosition							    		        ; Record the stop position x_first_measurement
M400																			        ; Make sure all data recording is complete

G1 X{move.axes[0].machinePosition-5}											; Move 5mm away from the material
G1 Z{move.axes[2].machinePosition+10}										; Move along the workpiece in X
G1 X{move.axes[0].machinePosition+15}										; Move 5mm away from the material
G1 Y{move.axes[1].machinePosition-20}										; Move 5mm away from the material
G1 Z{move.axes[2].machinePosition}	    										; Move along the workpiece in X

M558 F1000																		; Set the initial probing speed
G38.2 Y100 P0 K0																; Probe the material as a first pass
M558 F50																		; Set the final probing speed
G38.4 Y-10 P0 K0															        ; Probe the material again
M400																			        ; Make sure all movement is complete
set var.y_2=move.axes[1].machinePosition								    	        ; Record the stop position y_first_measurement
set var.x_2=move.axes[0].machinePosition					    				        ; Record the stop position x_first_measurement
M400																			        ; Make sure all data recording is complete
G1 Y{move.axes[1].machinePosition-50}										; Move 5mm away from the material
G1 X{move.axes[0].machinePosition+50}										; Move along the workpiece in X
M558 F1000																		; Set the initial probing speed
G38.2 Y100 P0 K0																; Probe the material as a first pass
M558 F50																		; Set the final probing speed
G38.4 Y-10 P0 K0																; Probe the material again
M400																			        ; Make sure all movement is complete
set var.y_3=move.axes[1].machinePosition								    	        ; Record the stop position y_second_measurement
set var.x_3=move.axes[0].machinePosition								    	        ; Record the stop position x_second_measurement
M400																			        ; Make sure all data recording is complete
M291 P"Probe Diameter" R"enter diameter of probe" S5 L0 H10			; Pop up box asking for operator input diameter of 
set var.d_probe=input															; set the diameter of the probe
;calculation
set var.delta_y={var.y_3-var.y_2}
set var.delta_x={var.x_3-var.x_2}
set var.m_1={var.delta_y/var.delta_x}											; m of the staight P2-P3
set var.m_2={(-var.delta_x)/var.delta_y}										        ; m of perpendicilar to straight P2-P3
set var.m_1_tan_rads=atan(var.m_1)
set var.m_1_tan_deg=degrees(var.m_1_tan_rads)

;calc the corner of workpeace
set var.x_4=((var.y_1-(-(var.x_3-var.x_2)/(var.y_3-var.y_2))*var.x_1)-(var.y_2-((var.y_3-var.y_2)/(var.x_3-var.x_2)*var.x_2)))/(((var.y_3-var.y_2)/(var.x_3-var.x_2))-(-(var.x_3-var.x_2)/(var.y_3-var.y_2)))
set var.y_4=(-(var.x_3-var.x_2)/(var.y_3-var.y_2))*((var.y_1-(-(var.x_3-var.x_2)/(var.y_3-var.y_2))*var.x_1)-(var.y_2-((var.y_3-var.y_2)/(var.x_3-var.x_2)*var.x_2)))/(((var.y_3-var.y_2)/(var.x_3-var.x_2))-(-(var.x_3-var.x_2)/(var.y_3-var.y_2)))+(var.y_1-(-(var.x_3-var.x_2)/(var.y_3-var.y_2))*var.x_1)
If var.y_2>var.y_3																; workpiece Zero coordinates
set var.x_5=var.x_4+(COS(ARCTAN(var.m_1))+COS(ARCTAN(var.m_2)))*var.d_probe/2
set var.y_5=var.y_4+(SIN(ARCTAN(var.m_1))+SIN(ARCTAN(var.m_2)))*var.d_probe/2
If var.y_2<var.y_3
set var.x_5=var.x_4+(COS(ARCTAN(var.m_1))-COS(ARCTAN(var.m_2)))*var.d_probe/2
set var.y_5=var.y_4+(SIN(ARCTAN(var.m_1))-SIN(ARCTAN(var.m_2)))*var.d_probe/2

;move over workpiece zero and set tool x&y to 0
G1 Y{move.axes[1].machinePosition-1}											        ; Move 1mm away from the material
G1 Z{move.axes[2].machinePosition+10}											; Move above workpiece

;G68 A0 B0 R{-var.m_1_tan_deg}                                                                                                        ; set Rotation

Exerqtor

@CanDo415
You have to indent the lines you want to be part of the conditional statement, thats a place to start at least.

CanDo415

@Exerqtor
like:

If var.y_2>var.y_3																; workpiece Zero coordinates
set var.x_5=var.x_4+(COS(ARCTAN(var.m_1))+COS(ARCTAN(var.m_2)))*var.d_probe/2
set var.y_5=var.y_4+(SIN(ARCTAN(var.m_1))+SIN(ARCTAN(var.m_2)))*var.d_probe/2
end if

If var.y_2<var.y_3
set var.x_5=var.x_4+(COS(ARCTAN(var.m_1))-COS(ARCTAN(var.m_2)))*var.d_probe/2
set var.y_5=var.y_4+(SIN(ARCTAN(var.m_1))-SIN(ARCTAN(var.m_2)))*var.d_probe/2
end if

?

Exerqtor

@CanDo415
No like:

if var.y_2 > var.y_3																; workpiece Zero coordinates
  set var.x_5 = var.x_4 + (COS(ARCTAN(var.m_1)) + COS(ARCTAN(var.m_2))) * var.d_probe / 2
  set var.y_5 = var.y_4 + (SIN(ARCTAN(var.m_1)) + SIN(ARCTAN(var.m_2))) * var.d_probe / 2

if var.y_2 < var.y_3
  set var.x_5 = var.x_4 + (COS(ARCTAN(var.m_1)) - COS(ARCTAN(var.m_2))) * var.d_probe / 2
  set var.y_5 = var.y_4 + (SIN(ARCTAN(var.m_1)) - SIN(ARCTAN(var.m_2))) * var.d_probe / 2

CanDo415

@Exerqtor
i tried this before in another case... everything unter the 2nd if wasnt done if the if doesn't match.
the problem of the missing end if