Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Tags
    3. fan broken
    Log in to post
    • All categories
    • MauriceMundefined

      Solved Falso on Fan Output

      Duet Hardware and wiring
      • fan broken • • MauriceM
      10
      0
      Votes
      10
      Posts
      415
      Views

      MauriceMundefined

      i pulled out the the fuse and put it back again and now it is working? 😄 WTF so much frustration without any reason 😄

    • nealjkundefined

      Duet Maestro fans problem

      Duet Hardware and wiring
      • fan broken fan0 maestro • • nealjk
      2
      0
      Votes
      2
      Posts
      388
      Views

      A Former User?

      Mosfet usually fail always on (or catastrophically to the point where there is nothing left of the part)

      So if the fan works on the always on output but not on Fan0 before and after the replacement its not untinkable the fault is elsewhere, unfortunately the next part in the chain is the main processor (FAN0 goes straight to pin 90 on the ATSAM4S8C)

      To further diagnose verify the part has connectivity from the Gate to R42, from the Drain to Fan0- on the header and from Source to ground. Then (with power on) check if you have a gate signal on either side of R42 with respect to ground when the fan is turned on.

      7e51baf8-718b-4112-bf12-47cc46fc8f10-image.png

    • chimaeraghundefined

      Fans not working

      Duet Hardware and wiring
      • fan broken duet3d wifi • • chimaeragh
      3
      0
      Votes
      3
      Posts
      252
      Views

      chimaeraghundefined

      @droftarts Thanks. Just checked. It's the blown fuse.

    • justinds89undefined

      Part Cooling Fan Not Working

      Duet Hardware and wiring
      • fan broken fan0 cooling • • justinds89
      6
      0
      Votes
      6
      Posts
      602
      Views

      justinds89undefined

      I would be interested to find out what component needs swapped out. I have some experience soldering, but not sure if it's worth attempting to fix without knowing more first.

      Like I said I was able to get everything working on Fan2 so not a huge concern for me currently.

    • danny_v1undefined

      Fan 1 output broken

      Duet Hardware and wiring
      • fan broken fan3 mosfet • • danny_v1
      7
      0
      Votes
      7
      Posts
      1.1k
      Views

      danny_v1undefined

      So I measured the voltage again. I plugged a connector with 2 cables at the fan1 pins and connected this to a multimeter.

      If I measure between VFAN and FAN1- I see 7.6V when the fan is at 0% on the web control and 12V when the fan is at 100%.