Announcement: Duet 3 Toolboard revision v1.1
-
@matt3o yes. They were the result of CAN communication issues and we're fixed in 3.2.2
-
@jay_s_uk said in Announcement: Duet 3 Toolboard revision v1.1:
@matt3o yes. They were the result of CAN communication issues and we're fixed in 3.2.2
There was also another less common case, which was fixed in firmware 3.3beta3.
-
Is there a list of what resellers will have these in the UK/EU?
-
Really great! Now I will get one!
To further "broaden the audience" to this board you might consider replacing the solder-jumper with a real one in the next iteration, then even the "only-will-burn-myself-with-a-solder-iron-fraction" might consider it
-
@lbi we looked at that but, as you can see, there is not a lot of space left!
-
@jmaddrell I know we are shipping them out as fast as we get them!
-
Fantastic choices all-around on the updates!
-
@t3p3tony said in Announcement: Duet 3 Toolboard revision v1.1:
@jmaddrell I know we are shipping them out as fast as we get them!
That doesn't actually answer the question though.
From going down the list the the majority of EU/UK suppliers are not listing the updated version, it appears the only filastruder are "on the ball" enough to be showing updated information, which is a pretty poor service from EU/UK suppliers.
I have even had it from a UK Supplier advertising the v1.0 boards but supplying v0.6 boards, so I am loathe to purchase in-case they just want to offload older stock, and not being able to purchase the newest item unless you contact the supplier and specifically request the v1.1 is tiresome.
-
I read that the accelerometer will only with the Duet 3 on standalone mode, not SBC. Any ideia when support for the SBC mode will come?
-
@marcelofs13 said in Announcement: Duet 3 Toolboard revision v1.1:
I read that the accelerometer will only with the Duet 3 on standalone mode, not SBC. Any ideia when support for the SBC mode will come?
In firmware version 3.4, which is also when input shaping will be supported.
-
Any chance we can get a STEP for the new Version? I am trying to do a mount for a tight space, would be useful to have a complete 3d model. Guesstimates from the 1.0-Step wont work well as the connectors changed and the new board is slightly larger...
-
@pixelpieper I too am interested in that - both for to revise my extruder design and to also make an illustrated guide to orientation and what the "I" value should be based on it's position. I plan on it being fully graphical so it's very easy to know what's correct. I plan on sharing that here too when I'm done.
-
-
The dimensions of drawing and 3D differ......
Not a big thing but:
The two upper holes are 13/38 and 47/38 in PCB vs. 13/39 and 47/39 in 3D....
Not talking about slightly shifted plugs....(UTC+1)
-
@t3p3tony Thanks!
-
@diy-o-sphere thanks, will fix that! The STEP is correct.
Edit: Fixed - it was actually all 4 holes shifted up 1mm as the hole sacing has not changed.
-
@T3P3Tony Here's a PDF I made that should help with what the "I" value should be for the toolboard, based on how it's oriented. Hope it helps.
-
@t3p3tony thanks, now it only has to become available at a European reseller
Voron V2.434 / Duet 3 Mini5+, Duet 3 Expansion Mini 2+, Duet 1LC V1.1 Toolboard
Voron V0.250 / Duet 2 Maestro -
@nuramori thanks!
-
@pixelpieper said in Announcement: Duet 3 Toolboard revision v1.1:
@t3p3tony thanks, now it only has to become available at a European reseller
I think its supposed to be a surprise, looks like it's too much to expect a structured and professional approach to distribution and notification of such distribution.
