Topics created by CTRDevelopments

@phaedrux 20% was much improved. I am now going to try 18% as still some very slight marks. The prints take a few days each so feedback is not the fastest, but it is a good test. Thanks for help

@jay_s_uk said in Duet 3 Tools:

@CTRDevelopments said in Duet 3 Tools:

Essentially can a 'tool' consist of a toolboard AND other inputs elsewhere?

dc42 said in Duet 3 Tools:

be connected to different boards.

yes

ahh, yes, didnt spot that. Would help if I read things properly! Cheers

So you've got it all working now?

I thought that might be the case, I was hopefully there was a setting to invert the logic. Thanks for confirming though 🙂

@Veti - good spot. MMU2 on my Prusa I have to say works pretty well, I just dont know how you would connect an MMU2 to the Duet. I only have a single spare stepper motor output so would need the onboard controller (I have multiple motors for Y Z and Extruder already...)

@Phaedrux

see here:
https://forum.duet3d.com/topic/18601/panel-due-hanging-up-after-loss-of-wifi

@bearer said in My Duet Printer:

I need to swap out a ballscrew as I have a bent one

first world problems much?

Jokes aside; looks like pretty hard core! Presume the smaller screen is the "HVAC" control?

yes, first world problem! It was originally intended to also do some light machining etc so i went with ballscrews. Just never went down that route in the end as I have access to 3 axis CNC machine.

Yes smaller screen is HVAC and a few other bits and pieces. I also monitor the fan speeds, voltages and you can change the enclosure setpoint. I am building a second for the other printers enclosure with a 7 inch touch screen (I will probably swap the larger screen to this printer as it will 'match' the Paneldue

I also need to sort out the mess of wires at the printhead. It was originally in a drag chain like the motor wires but the loop cost me access on the extreme end of the x axis so went to an umbilical cord but it just looks a mess now 😞

Post some details about your corexy. motors, pulley sizes, extruder, config.g, etc. Post the STL as well.

@CTRDevelopments said in Mesh Bed Leveling Not moving bed:

M376 H4 ; bed compensation taper

aha, it seems to work if I comment out this line. Not sure why though?

Hi, having thought the push-pull was working nicely, and being out of filament for the past 6 weeks I have just got back to a mess on the bed. It looks like the initial extruder pushing up the bowden has exceeded the 'actual' extruder at the hotend. Its really strange though as I watched it on and off for 2 hours and it was perfect, they were matched exactly. Then this morning its not happy 😞 Are there moves in the slicer that could somehow negate the 'pushing' extruder?

@CTRDevelopments Yes, just increase the 'S' value. Can be as high as you want. I'd run G32 at least a couple of times if it is a long way out the first time you run G32.

Ian

Many thanks. I will pop it in the post tomorrow