Topics created by dkraja42

@alankilian ¯\_(ツ)_/¯

Go through this to get connected with YAT. Duet3 should be the same as for the Duet2 Ethernet.
https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7

As @Phaedrux says, but also post the results of sending M122 B40, M122 B41, M122 B42, M122 B43 and M122 B44.

@dkraja42 said in Duet 3 MH6HC with Duet expansion 1XD, configuration issue:

@dc42 yes we corrected M584 command line. but not able to move any axis.
30/11/2020, 13:04:11 M32 "0:/gcodes/homex.g"
File 0:/gcodes/homex.g selected for printing
30/11/2020, 13:04:10 Upload of homex.g successful after 0s
30/11/2020, 13:03:59 M32 "0:/gcodes/config.g"

All of your config files are in the wrong folder.

The gcodes folders is for the sliced gcode files to print.

All the config files and homing files must be in the /sys folder.

Nothing will work until you move your config files into the sys folder.

See here for what the SD card file structure should look like.

https://duet3d.dozuki.com/Wiki/SD_Card#Section_Creating_the_file_structure

@dkraja42 they have stock, you just need to email them.
sales@duet3d.com I think

@Phaedrux said in 7" touch display connect with duet 3d board:

https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3

Have you actually gone through any of the documentation?