Topics created by jackatom74

I have moved this to the firmware wish list as it will probably require firmware changes to implement.

@Phaedrux having a lock screen for the paneldue is on the wishlist.

@jackatom74 Yes, this is the way to achieve that.

@dc42 said in Microstepping in relation to deviation?:

Deviation visit the root mean square average of the height error at the probe points.

Thank You DC42, Something clicked in my head and I went back and looked at the the repeatably of my trigger height and started messing with the smart effector sensitivity. Correcting this fixed everything. I am around 20um deviation now, Also thank you to everyone else who lent me their guidance.

The digikey are perfect, the cable quality itself is really nice for the fast/constant movements of the delta effector so I'm really loving it, looks nice too. I just had way too much issue crimping the cat6 double wire and getting it to fit even though I have a good crimper. I've never really had that problem before. Also the cable fits a lot better(clips in and out with no pressure)

@phaedrux wow, that's a neat idea using motor stall.

@3dpmicro Its 8mm and of acceptable flatness, and maybe a little heavier than my 4mm boro glass. the prints are sticking well and once they cool coming right off without a fight.
0_1525126319650_20180430_171742.jpg

Below is one of the corners for my printer I printed last night.
PETG@245C, bed temp at 105C and then I dial it back every 3 layers until I get to 85C

0_1525126387450_20180430_171757.jpg