Topics created by mjhall29

The usb pins are not available on any other connectors, but you could connect the wires from a usb cable to other points on the board i.e the diode and the resistors that the socket was connected to. Alternatively, you could connect a USB to serial converter to the PanelDue connector and use that.

An update on the original question, I came home tonight and booted the duet control, for about 4 or 5 minuets it was the same as yesterday, so i went and made a cup of tea. when i got back the terminal i left running had stopped looping the class gcode spinning reports and just said wifi server started.
i started a web browser and connected.
I have updated the firmware and it is like nothing had ever been wrong ???
so now to put it back in the printer and try it.
Thanks for the responses,
I would like to know what caused it but it seems to be working again now.
regards
Martin

Not seeing things is normal. I had a recurring problem, when the y homed, y0 kept changing and I didn't see the problem until I turned the printer around. The bed insulation was hitting one of the switch connectors just right to disconnect it while homing, but it reconnected enough when the bed moved away from it. 🙂

It started working at about layer 10 and is now updating for the moment, I have no idea why. I didn't do any thing, was just watching it and it started working

Thanks, Worked first time.

@mjhall29:

Thanks for the response, I am now looking forward to the release of of the DueX5, if you need any testing done I am your man.

That job has already been taken - you'll have to get in the queue 🙂