Topics created by oc_geek

Just chiming in to say I am also interested in this feature and would greatly appreciate the flexibility.

@oc_geek Standalone or SBC? The macro handling for the two can be slightly different.

@chrishamm said in Type conversion (float -> int):

@oc_geek It sounds like you are looking for floor.

yes sorry...i'm blind LOL

floor(expression) made it happen

Thanks

@jay_s_uk
I disable wifi optimisation for the SSID my printer lives on. first time in a long time its still online over night. If the issues comes back i'll start a new thread

@dc42 Thanks

@phaedrux received, thanks

@oc_geek said in M106 issue - solved:

i got confused by the "tool" thing

Wait 'till you start using a mixing hot end with 6 extruders and 9 tools defined. Then you'll really know how what confusion feels like 🙂

@Phaedrux as i was fearing this to happen (i saw signs weeks back) i actually bought (when those were still available) a spare Mini 5+ from Dold (Germany) at the same time i bought the 2+ expansion; i didn't like the idea to stay without my only controller for e.g. some weeks if something bad would have happened

That said it would be redundant to me to have two cards and if that would be an option i would rather prefer to go with a refund rather then a replacement; this also considered that i bought one of the first cards which were ava and those were from UK E3D...

Is that possible ?

thanks in advance

@lbi As in the other posts, you need to connect the signal to both IOx.in and IOx.out from the DHT. 3.3V feed from that connector.

Code for my setup is

;DHT Sensor on IO4 M308 S10 P"io4.out+io4.in" Y"dht22" A"Chbr Temp[C]" M308 S11 P"S10.1" Y"dhthumidity" A"Chbr Hum[%]"

HTH, Paul.

I'll add a note to the documentation.