Posts made by TopperHarley

I think he wants to move the printer to the initial/zero/home postition without homing it first. Maybe a global variable could be a way to to something like this?

Hello guys!

I have installed the SBC daughterboard from @deadwood83, because i want to switch to SBC mode later with the next release of RRF. It seem like my printer can't access to my network anymore with the installed daughter board (running standard image Duet2CombinedFirmware.bin 3.2.2).

I was expecting there should be no issues running the standard image with installed SBC daughterboard.

@resam
I think you talk about the Wifi-Version. This one is for the Duet 2 Ethernet.

@o_lampe
Danke! Ich habe ihn gerade mal angeschrieben.

I have ordered some boards from @deadwood83 at JLCPCB.

If you are from Germany and need one, feel free to contact me: https://forum.duet3d.com/topic/22545/3x-duet-2-ethernet-sbc-adapter-to-sell-germany-only

PUSH!!!!

2 sind noch da!

Hallo zusammen!

Ich habe vor einigen Tagen 5 Platinen folgende Platine von @deadwood83 bei JLBPCB bestellt (vollständig bestückt):

https://easyeda.com/p.cartwrig/duetdaughterboard_sbc
https://forum.duet3d.com/topic/17203/duet-2-ethernet-and-sbc/164?_=1617469843240

Nun habe ich 3 übrig und würde sie gern an die deutsche Community weitergeben. Wer also Interesse hat, bitte einfach melden.
(Ich dachte so an 5-10€ inc. Versand pro Platine. Für alle 5 habe ich ~30€ gezahlt)

Liebe Grüße
Topper Harley

I have ordered some of these nice PCBs by @deadwood83 for Duet2-Ethernet at JLCPCB: (PCBs are full by JLCPCB)
https://easyeda.com/p.cartwrig/duetdaughterboard_sbc
(Big thanks for the great work!)

Because i only need one of these, i have to share 4 to the community. So if you live in germany, fell free to contact me.

@chrishamm

I was able to reproduce the issue:

@chrishamm

Im running a Duet2 Ethernet (standalone) with RRF3.2 + DWC 3.2.

I have tried to reproduce the issue, but this time everything looks just fine...

Just a small issue i have notivced:

Looks like the maximum value is not updated properly.

(Duet Web Control 3.2.0)

Best regards
Topper Harley

@Phaedrux

Thanks for your help!

It is not a big deal for me. The Menu entry "Display" (under file section) is a little bit confusing i think. First i thought i can display all file from SD card here.

Maybe it is an option to rename "Display" to "External Display" or something like this.

@Phaedrux
There is no menu folder on my SD card.

hi,

is there any option to disable this section:

I do not use a 12864 display on my DUET 2 (RRF + DWC 3.2).

Thanks for your help!

Hello,

as far as i know RRF 3.2 will be released soon and support (officially?) Duet 2 Wifi/Ethernet + SBC. I discovered this very long and interesting thread with some nice approches how to connect Duet 2 to SBC https://forum.duet3d.com/topic/17203/duet-2-ethernet-and-sbc.

There are any plans for an official adapter PCB or a detailed manual how to connect SBC to DUET 2 Wifi/Ethernet?

Best regards
TopperHarley

@TopperHarley

@dc42 do you know if something like this is planed?

I really like the Idea to use a SBC with the Duet 2! Really great work! Are there any plans to offer some official adapter(s) in future? (maybe in the DUET-Shop?) I'm ready to pay for such a nice solution like the adapter made by @arhi or @deadwood83.

Sometimes i use https://www.gcodeanalyser.com/.