Topics created by wbrokow1

@droftarts OK thanks

@wbrokow1 the RRF part for Smoothieboard and other LPC processor based boards is no longer maintained, due to the low amount of RAM provided by that processor.

The Smart Effector should work with Smoothieware excep that you won't be able to program the sensitivity.

@wbrokow1

Check this link to M140

Frederick

@wbrokow1 Hi, so I'm currently running these values on my V2.4 350mm :

M566 X500 Y500 Z500 E450
M203 X40000 Y40000 Z3000 E7200
M201 X7000 Y7000 Z350 E2000
M204 P12000 T12000

I use a Rapido, 0.5 nozzle and Lgx lite which work well at these values for me. Double check your slicer settings.

@wbrokow1 Ok. I figured it out. I downloaded the dwc.zip file and extracted into the www directory and it seems to be fully functional
Thanks

@tas Ah, ok . thanks for the help! this should be written somewhere. It probably is, I just didn't look hard enough.
To everyone who participated: thank you very much

@wbrokow1 the accelerometers supported by RRF are the LIS3DH and LIS3DSH. They have a fast readout mode, which allows us to read the acceleration data without getting the artefacts in it that we see with the ADXL345.

@droftarts yay! that worked. I am really getting to like duet 3d and reprap firmware. let's label + and - from now on! lol

@Phaedrux thanks!

@dc42 Thank you so much. With support like this all my future boards will be Duet!

@wbrokow1 said in Voron Z offset question:

seems to be a shorted PPhase A error on drive 1.0

Check your wiring.