Topics created by 3dprinting meathead

Well, no error messages or codes, it just kinda decided to run bed leveling starting from away from the endstop and moving toward it. After it scaring me twice, I reset the x probe area to 200 and let it run and it works fine.
My map comes up with the axis indicator(those xyz lines that form a partial box) on the right now instead of the left, kinda confusing at first but it works so I must adapt.
And I did get a perfect first layer so it's definitely functioning right.
I'll mark this as answered because it does work.

ok, I think I got it figured out

Old
M208 X40 Y0 Z0 S1 ; Set axis minima

New
M208 X-40 Y0 Z0 S1 ; Set axis minima

@dc42:

It sounds to me that the wifi module lost the connection to your router. I have a major rework of the wifi code planned, which will include automatic reconnect.

Sending M552 S0 followed by M552 S1 from either USB or PanelDue may get the connection working again without interrupting the print.

Update: I am having a lotof issues connecting to the web interface now. m552 reset proceedure not helping. Printer connects to the server easily, but web interface will not.

https://youtu.be/ZmujcBFAkEo

Should I reinstall the web interface firmware? It doesn't seem to be a hardware issue. Any settings I can change?

I did try closing and opening google chrome and deleting cookies n cache

If you're interested, this is my 105MB gcode being printed https://www.youtube.com/watch?v=ZLwHOcH_UFk

@Jackal:

Your M557 command should come before G29

Thanks, I'll try that tomorrow.

Yup, me not knowing what I'm doing strikes again! Thanks that did it!

Ok, I just cut the tab.
It's kinda a pain.

the best way I found was to use the back side of a utility knofe blade corner, it's pretty much the exact width of the jumper, and it scrapes out the jumper, instead of cleanly slicing through it and not removing it, as that could potentially short later.

@Agniusm:

Its not just that. Its same like in a vehicle. Its nicer to control things via phisical buttons rather then lcd touch screen.

A vehicle is a completely different environment, you need to feel the buttons so you can keep your eyes on the road.

@Agniusm:

Btw, does paneldue has limited set of characters on the keybard? I miss " for setting up wifi AP's

The latest beta PanelDue firmware provides a lot more characters.