Topics created by Theboz1419

@oliof Thank you. Yeah for some reason I have

G31 X0 Y-21 Z0

I have not clicked on the links in your last post, but I believe G31 to be the offset of the z-probe.

When I first installed the Duet on my Makergear M2 I had to print a mount for the Probe and I did have the offset on the Y axis. My new print I have it on the X axis. Now, I understand, thank you very much.

You may have a look at https://forum.duet3d.com/topic/36297/simplyprint-io-unoffical-duet-connector
You can use it to control your duet powered printer via an app or browser while not at home (via an raspberry pi with this software running) and still be able to use DWC while at home.

Thats at least what I do 🙂

I see you've already sent an email for a warranty replacement. We arrange for a replacement there.

For your other printing issues, please start a new thread for those if they remain after your new card arrives.

@Phaedrux I would but, I seem to have a new issue which I have posted on a new post. My SD card reader won't read Sd cards

In RRF (RepRapFirmwre), an M118 posts a message somewhere (PanelDue, log file, DuewWebControl, etc). It has a parameter "S" which is the message being sent. Your error message implies that there is no S parameter in your gcode file. You can easily find this if you open your gcode file in any text editor and search for "M118". You'll see what parameters are included and can also add an S and your message (in "quotes"), then try printing again.

But the best thing is to set up your slicer for RRF firmware, most likely in the printer definition.

@Theboz1419 Great, glad you got it working. Generally, when posting for support, it's worth posting your config.g, the response to M122 (to see firmware version and hardware info), any relevant macros to the issue (eg homing macros if it's a homing issue), and then any relevant images of wiring. You'll get more accurate support, faster. Otherwise we're just guessing at what the problem is! See https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help

For the BLTouch, see https://docs.duet3d.com/en/User_manual/Connecting_hardware/Z_probe_BLTouch

Ian

@dc42 wow, I am actually impressed with the Duet Forums. The quickness of getting answers to questions is awesome, Thank you.

I have the Duet 3 mini wifi. I figure that was probably my answer to my question was to just group them up, and if I had my multimeter available I probably wouldn't need to ask the question, but I wanted to be sure or it was going to drive me crazy and I wouldn't get much sleep, lol.

Thanks again for the fact response 👍

@Theboz1419 It looks like the Rambo is wired in the same way, ie one pair on the left hand pins, the other pair on the right:

alt text

Don't worry about the which pair goes where for motor direction, as this is easy to change in the config.g file: https://docs.duet3d.com/en/How_to_guides/Commissioning#h-10-check-stepper-motors

Ian

@droftarts Thank you