Topics created by abindarraez1

@abindarraez1 Please see the post here, which explains what information is useful to include in your post to help us to help you.
https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-help

Ian

@dc42 Thanks a lot

@abindarraez1 It seems to be working. I will upload a new ticket if there is a failure

@droftarts Hello again. I was doing some testing on the board. And I noticed the Status Led Has a constant voltage of 0.44V through it in this state. Would this indicate a short circuit of some sort or A failure of the firmware?
I have tried with no success to get either a Linux or Windows computer to get to even recognize the board. They don´t seem to be able to read it. I try to reset it but it does not let me doit.

For your review

https://docs.duet3d.com/en/User_manual/Connecting_hardware/Motors_connecting

https://docs.duet3d.com/en/How_to_guides/Commissioning#h-10-check-stepper-motors

@Phaedrux Thanks

@Phaedrux It was a short circuit.I will repair the piece and inform if that was the solution