Topics created by pd

@pd said in Voron Afterburner Toolhead board:

@exerqtor thanks I would be grateful for a picture

Sure, here you go 😊
alt text

alt text

but it does seem OK with 12V so I'll stick with that until the new one comes.

It was the ground pin. Many thanks

@pd said in My CNC duet 3 experience:

Workbee

Cool! Keep the posts coming, keep us informed.

The problem was I forgot to set up a dummy Tool. Without it the CNC setup doesn’t work. I’ve also got the Endstops working so I’m now good to go.

@bearer well an empty config.g is not a state i would expect the system to be in except on initial setup. at which point, whatever is shown in DWC is not as important.