Topics created by WZ9V

Tevo Little Monster Delta. I used the T3P3 Kossel as a starting point. Using a borrowed config from Facebook it worked fine. Generating a new config in the Configurator I get a Json error as soon as I home all. I'll try a catch the particular error but it was something along the lines of invalid parameter in json response.

Oh I set the Configurator to firmware 1.17+ and I'm running 1.18.2 with all the recommended components for that version.

…..

You can have up to 442 points on a Cartesian printer with the Series 2 Duets, e.g. 21 x 21 points. On a delta it's still 21 points across the diameter because the grid is represented as a rectangle with inaccessible points not probed.

Good info. Have had this happen to me to.

Very nice. that will be a nice upgrade.

@dc42:

With firmware 1.19 beta and the latest DWC you can do all of that in a macro. Use the M290 command to display the message and wait for a response. Before long, PanelDue will support M290 too.

Thanks that did the trick.

The noise generated by brushless fans is negligible compared to the noise generated by stepper motors.

Thanks. Sending email.