@dc42

Thank you both. got it all working!

@t3p3tony
Thank you!

@t3p3tony Thank you so much!

@gixxerfast Thanks for reporting this, I've prepared a bug fix for the upcoming software version 3.4-b5.

@fcwilt said in Error: unknown variable 'global.magprobestatus':

global magprobestatus = "unknown"

Thanks You, that did it!

@dc42

Thank you,

And is there a way to calculate the bed compensation value for a given X,Y position?

@dc42 said in Is it possible to create an array variable?:

@thedragonlord it's not possible right now.

ok, thanks

@dc42 That worked perfectly! Thanks

@dc42
...and G10 L2 is the only way to fill the array or alter single values later?

@simwiz start.g has to be in the sys folder and will run slicer indipendent at every start...
EDIT: sorry, you was answering to t3p3tony

@jbjhjm said in M703 - error if no filament is selected?:

if move.extruders[state.currentTool].filament == "" abort "Error: No filament selected" if move.extruders[state.currentTool].filament == null abort "Error: No filament selected"

I have not encountered a situation where the null check was needed - perhaps it can be null but I don't know when.

I have no test for a tool being selected as that is done just after the checks. I have no multi-tool printers.

T0 M703

Frederick

@owend it's the inner parentheses that are redundant.

Note to self. Don't muck with a running macro file.

@ctilley79 said in Filament Config.g and Conditional Gcode:

I was hoping to execute M703 once, and RRF automagically execute the condition at the appropriate layer height. Wishful thinking lol.

You could do that using a few global variables for the desired values.

They would be set once in the filament config.g file.

They would be used in a dedicated layer change file, something like print_layer_change.g.

Frederick

@fcwilt
Yea each stepper has its own driver all of the drivers are tied to the z axis in the config file.

I think the auto bed leveling is exactly what I am looking for, but I just need to do some reading to understand how to do this with my set-up.

@dc42 thank you!

@o_lampe the ringing frequencies do not depend on print speed.