Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    PrusaSlicer 2.2 released

    Scheduled Pinned Locked Moved
    General Discussion
    prusaslicer
    18
    46
    3.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • droftartsundefined
      droftarts administrators @whosrdaddy
      last edited by

      @whosrdaddy I don’t think M601 is defined, so you can make a macro in the sys folder called M601.g which will be called when RRF encounters it in Gcode. Then put M226 in that macro. At least, in theory...

      Ian

      Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

      1 Reply Last reply Reply Quote 1
      • whosrdaddyundefined
        whosrdaddy
        last edited by

        @droftarts didn't know about that one.
        Printer is busy printing atm but will test this asap, that would be awesome! 👌

        droftartsundefined 1 Reply Last reply Reply Quote 0
        • mrehorstdmdundefined
          mrehorstdmd
          last edited by

          I sliced a 42 MB STL file to a 280 MB gcode file a couple days ago and it ran fine on the printer. I've had trouble in the past with slicing very large STL/gcode files, so they must have fixed something.

          https://drmrehorst.blogspot.com/

          oliofundefined 1 Reply Last reply Reply Quote 0
          • droftartsundefined
            droftarts administrators @whosrdaddy
            last edited by

            @whosrdaddy from the video, I thought you could put any Gcode in at a particular layer? Haven’t watched it again, though.

            Ian

            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

            whosrdaddyundefined 1 Reply Last reply Reply Quote 0
            • zaptaundefined
              zapta @matt3o
              last edited by

              @matt3o said in PrusaSlicer 2.2 released:

              my 2D printer still jams paper...

              Please post your config.h file.

              1 Reply Last reply Reply Quote 2
              • zaptaundefined
                zapta @whosrdaddy
                last edited by

                @whosrdaddy said in PrusaSlicer 2.2 released:

                Now that we finally have layer pause option with v2.2

                I saw the announcement about this feature. Previous version had an easy to use pause at layer option that worked very well for me.

                I just move the vertical layer slider to the layer I want and click on the [+] icon next to the slider. The printer then pauses at that layer, and you can change filament or just resume with same filament.

                1 Reply Last reply Reply Quote 0
                • whosrdaddyundefined
                  whosrdaddy @droftarts
                  last edited by

                  @droftarts Lol now that you say it, indeed you can. I was too focused on the "pause" thing 😉

                  1 Reply Last reply Reply Quote 0
                  • oliofundefined
                    oliof @mrehorstdmd
                    last edited by

                    @mrehorstdmd they did significant changes to their movement planner. Maybe that helped.

                    <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                    mrehorstdmdundefined 1 Reply Last reply Reply Quote 0
                    • zaptaundefined
                      zapta @PaulHew
                      last edited by

                      @PaulHew said in PrusaSlicer 2.2 released:

                      S3D, could not justify the cost. £130 per year.

                      S3D is in decline, both the company and the product. I have a paid license but I now prefer the free slicers.

                      You can get some insight on how the company operates here: https://www.glassdoor.com/Reviews/Simplify3D-Reviews-E1187369.htm

                      (They could learn a thing or two from Duet3d which is smaller but is more productive and provides much better customer support.)

                      1 Reply Last reply Reply Quote 1
                      • mrehorstdmdundefined
                        mrehorstdmd @oliof
                        last edited by

                        @oliof so it seems!

                        https://drmrehorst.blogspot.com/

                        1 Reply Last reply Reply Quote 0
                        • Turboundefined
                          Turbo
                          last edited by

                          It's now my go to slicer instead of Cura, but there's one major issue for me and thats how it handles dual extrusion. Ill set it to extruder 2 and it'll heat up extruder 1, and when 1 heats up, it tries to extrude out of heater 2. I have to manually heat up extruder 2 before sending it gcode, otherwise things aren't pretty

                          Cant stop tuning wont stop tuning.
                          Dbot, Custom i3, Voron 0&2

                          Danalundefined 1 Reply Last reply Reply Quote 0
                          • Danalundefined
                            Danal @Turbo
                            last edited by

                            @Turbo said in PrusaSlicer 2.2 released:

                            It's now my go to slicer instead of Cura, but there's one major issue for me and thats how it handles dual extrusion. Ill set it to extruder 2 and it'll heat up extruder 1, and when 1 heats up, it tries to extrude out of heater 2. I have to manually heat up extruder 2 before sending it gcode, otherwise things aren't pretty

                            Hmmm... I'm running SlicerPE output into a toolchanging printer with no editing of the G-Code. Everything heats just fine. Hmmm...

                            Do you have "wait for temp" g-code in your TPOST macros?

                            Delta / Kossel printer fanatic

                            Turboundefined 1 Reply Last reply Reply Quote 0
                            • Turboundefined
                              Turbo @Danal
                              last edited by

                              @Danal Is that within prusaslicer or the firmware? never used dual extrusion before and i half expected it to just insert t0/t1/etc into the gcode. i open up a thread about it:
                              My Post

                              Cant stop tuning wont stop tuning.
                              Dbot, Custom i3, Voron 0&2

                              1 Reply Last reply Reply Quote 0
                              • insertnamehereundefined
                                insertnamehere
                                last edited by insertnamehere

                                Another slicer to try is Slic3r++

                                It's a fork of PrusaSlicer, and is currently at 2.2, but also include a lot of extra functionality, like top layer ironing, (see image). Gives great results.

                                IMG_1465.jpg

                                droftartsundefined CaiJonasundefined 2 Replies Last reply Reply Quote 0
                                • droftartsundefined
                                  droftarts administrators @insertnamehere
                                  last edited by

                                  @insertnamehere said in PrusaSlicer 2.2 released:

                                  Another slicer to try is Slic3r++

                                  This one? https://github.com/supermerill/Slic3r

                                  Ian

                                  Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                  insertnamehereundefined 1 Reply Last reply Reply Quote 0
                                  • insertnamehereundefined
                                    insertnamehere @droftarts
                                    last edited by

                                    @droftarts said in PrusaSlicer 2.2 released:

                                    This one? https://github.com/supermerill/Slic3r
                                    Ian

                                    Yes, that's it.

                                    1 Reply Last reply Reply Quote 0
                                    • zaptaundefined
                                      zapta
                                      last edited by

                                      Apparently PrusaSlicer disables the Filaments management tab in Configuration Assistance for duet printers. That tab is enabled only for prusa and third part printers but not for custom printers. To reproduce install PrusaSlicer with only a duet printer and see if you can see that tab.

                                      Developers say it's by design bu I don't understand the logic behind it.

                                      PaulHewundefined matt3oundefined 2 Replies Last reply Reply Quote 0
                                      • PaulHewundefined
                                        PaulHew @zapta
                                        last edited by

                                        @zapta Is this the tab you are referring to?
                                        Screenshot from 2020-03-30 09-04-01.png

                                        RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
                                        Voron 2.4 disassembled..... Waiting for the RailCore Mini....

                                        zaptaundefined 1 Reply Last reply Reply Quote 0
                                        • arhiundefined
                                          arhi
                                          last edited by arhi

                                          I'm slowly migrating from s3d to ideamaker but am constantly checking out slic3r and ps too and they are producing very good results. PS2.2 fixed the major issue I had with slic3r/PS and that's "lot more movement than s3d/ideamaker for same object", looks like they figured out how to optimize moves.

                                          1 Reply Last reply Reply Quote 0
                                          • matt3oundefined
                                            matt3o @zapta
                                            last edited by

                                            @zapta I believe the only option that is hidden is the "machine limits" one that is limited to marlin for some reason. As far as I understand it only helps with print-time-prediction though

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA