Accelerometer Usage

[jbergene]

@tekstyle thats smart! i will try that

[oliof]

@phaedrux the documentation currently lacks the two crucial sentences, how to find out the dominant frequency of an axis ... but the InputShaping plugin will solve this eventually (-:

[jbergene]

@dc42

8937
c3H
0KK1F?

[CCS86]

@oliof said in Accelerometer Usage:

@phaedrux the documentation currently lacks the two crucial sentences, how to find out the dominant frequency of an axis ... but the InputShaping plugin will solve this eventually (-:

This feature is barely in beta form. You can't really expect comprehensive documentation at this point.

[oliof]

I am not expecting comprehensive documentation at this point. As I wrote I am looking forward to the eventual solution via the InputShaping plugin.

[tekstyle]

@phaedrux i have the accelerometer plugin. i was able to visual the graph for all 3 axis. i just dont know what to look for as the link provided isnt clear on how to interpret the data to figure out which hz to use. or i am just not understanding the content.

[Phaedrux]

@tekstyle No you're right. That part is coming and hopefully will be more automated by the plugin to suggest what it should tune out, among other things.

[tekstyle]

@phaedrux oh ok. i'll wait for that in the meantime. Thank you.

[o_lampe]

@jbergene
mine says "DSH" clearly, not sure what a DH should show? Anyone?

[oliof]

18.8.2021, 07:37:18 M955 P0
Accelerometer 0 type LIS3DH with orientation 20 samples at 1344Hz with 10-bit resolution, SPI frequency 2000000

[jbergene]

@o_lampe Yeah maybe ill just try the DSH that arrived yesterday. that one says
2304 - DSH - YP3HC"

Do you know the orientation of the purple LISD3DSH board? X Y Z
I cant find that information anywhere

[o_lampe]

@jbergene

According to this picture

• positive X goes to the right
• positive Y goes to the back
• positive Z goes up

[jbergene]

@o_lampe thank you:)

[tekkydave]

@gloomyandy I bought one from that seller. The board seems to indicate a LIS3DSH but the chip has 3CH on it which is a LIS3DH. Have you connected it up & what does the Duet report?

I bought two boards from different sellers. One should be a LIS3DH and the other a LIS3DSH. They look identical to me and both have 3CH on the chip.
The only difference is one has OED26 after the 3CH and the other OED27.
I have only connected the OED26 to the Duet so far.

They both look like this on the back:

I'm assuming that the Duet will report the correct chip.

Edit: I have soldered a connector to the other one (OED27) and tested it with the Duet. Also get same message as the other one

Accelerometer 0 type LIS3DH with orientation 14 samples at 1344Hz with 10-bit resolution, SPI frequency 2000000

Hmmmpphhh!

Edit:
Further tests connecting the device to an Arduino confirm it is a LIS3DH as it returns device id = 51 (0x33). So despite it being advertised as a LIS3DSH and the pcb indicating that it is - well it isn't. So be careful when buying these folks and check the code on the chip:
3CH = LIS3DH
DSH = LIS3DSH

I have ordered another one from the link given by @dc42 above. Let's see what turns up

[gloomyandy]

@tekkydave Mine is marked C3H OED27. Not had chance to try it yet.

[tekkydave]

@gloomyandy It is a LIS3DH then. I have just run some tests connecting one up to an Arduino. I can only get it to communicate using an LIS3DH library.

[gloomyandy]

@tekkydave Have just tested mine and RRF 3.4 seems to think it is a LIS3DH, which is a pain as I really wanted a LIS3DSH to test with (I look after the RRF STM32/LPC port). Oh well looks like I need to try and order from a different supplier.#

[tekkydave]

@gloomyandy

[Blacksheep99]

@tekkydave said in Accelerometer Usage:

@gloomyandy I bought one from that seller. The board seems to indicate a LIS3DSH but the chip has 3CH on it which is a LIS3DH. Have you connected it up & what does the Duet report?

I bought two boards from different sellers. One should be a LIS3DH and the other a LIS3DSH. They look identical to me and both have 3CH on the chip.
The only difference is one has OED26 after the 3CH and the other OED27.
I have only connected the OED26 to the Duet so far.

They both look like this on the back:

I'm assuming that the Duet will report the correct chip.

Edit: I have soldered a connector to the other one (OED27) and tested it with the Duet. Also get same message as the other one

Accelerometer 0 type LIS3DH with orientation 14 samples at 1344Hz with 10-bit resolution, SPI frequency 2000000

Hmmmpphhh!

Edit:
Further tests connecting the device to an Arduino confirm it is a LIS3DH as it returns device id = 51 (0x33). So despite it being advertised as a LIS3DSH and the pcb indicating that it is - well it isn't. So be careful when buying these folks and check the code on the chip:
3CH = LIS3DH
DSH = LIS3DSH

I have ordered another one from the link given by @dc42 above. Let's see what turns up

I ordered one from the seller DC42 linked to and this is what I received.

[tekkydave]

@blacksheep99 should be a LIS3DSH from the chip id of DSH.